Hi,

I need assistance in debugging and fixing a problem I have with a contact
form.

Let me describe the setup first, because I think this is where things go
astray:

+ On my development server things work, but they break on the target host.

+ The target host uses AFS. Templates are being compiled and once I give
correct permissions to files in templates_c pages are displayed. I needed to
disable caching though, but that's something the customer can live with.

+ The target hosts permits sessions. From reading the SmartyValidate README I
believe this is required.

I have very limited access to the machine. I can only access logs from the day
before using a webinterface making it very hard to debug this for me.

Here's what happens:
If I leave the contact form and the corresponding kontakt.tpl the way they
are, I get an empty page in the browser. The Server says "200 OK" and insists
it delivered the page successfully. (The admin told me that...)

If I remove any code starting from <form> through </form> - including any
SmartyValidate calls - I can display the page without the form.

In yesterdays error log I noted this:

[Wed Jan 25 11:04:21 2006] [error] PHP Fatal error: Smarty error: [in
kontakt.tpl line 20]: syntax error: unrecognized tag 'validate'
(Smarty_Compiler.class.php, line 580) in
/afs/--replaced--/webserver/Smarty/libs/Smarty.class.php on
line 1088

To me this means Smarty does not know what 'validate' should do, right?
It loads Smarty.class.php, though. Registering? You see I am speculating.
Something I hate to do. I'd rather measure...

Any ideas what I can do?

TIA,

p@rick



Here's the kontakt.php:

<?php
session_start();
require('/afs/-- replaced -- /Smarty/libs/Smarty.class.php');
require('/afs/-- replaced -- /Smarty/email_message.php');
require('/afs/-- replaced -- /SmartyValidate/libs/SmartyValidate.class.php');
$smarty = new Smarty();
$smarty->template_dir = '/afs/-- replaced -- /webserver/smarty/templates';
$smarty->compile_dir = '/afs/-- replaced -- /webserver/smarty/templates_c';
$smarty->cache_dir = '/afs/-- replaced -- /webserver/smarty/cache';
$smarty->config_dir = '/afs/-- replaced -- /webserver/smarty/configs';
// $smarty->debugging = 'true';

if(empty($_POST)) {
// new form, we (re)set the session data
SmartyValidate::connect($smarty, true);
// register our validators
SmartyValidate::register_validator('form_subject', 'Subject', 'notEmpty', false, false, 'trim');
SmartyValidate::register_validator('form_message', 'Message', 'notEmpty', false, false, 'trim');
SmartyValidate::register_validator('form_firstname ', 'Firstname', 'notEmpty', false, false, 'trim');
SmartyValidate::register_validator('form_lastname' , 'Lastname', 'notEmpty', false, false, 'trim');
SmartyValidate::register_validator('form_sender_em pty', 'Sender', 'notEmpty', false, false, 'trim');
SmartyValidate::register_validator('form_sender_va lid', 'Sender', 'isEmail', false, false, 'trim');
// display form
$smarty->display('kontakt.tpl');
} else {
// validate after a POST
SmartyValidate::connect($smarty);
if(SmartyValidate::is_valid($_POST)) {
$smarty->assign($_POST);
// no errors, done with SmartyValidate
$from_name=$smarty->get_template_vars('Firstname')." ".$smarty->get_template_vars('Lastname');
$from_address=$smarty->get_template_vars('Sender');
$reply_name=$from_name;
$reply_address=$from_address;
$reply_address=$from_address;
$error_delivery_name=$from_name;
$error_delivery_address=$from_address;
$to_name="example";
$to_address="john@example.com";
$subject=$smarty->get_template_vars('Subject');
$message="".$smarty->get_template_vars('Message')."\n\n--\n".$smarty->get_template_vars('Firstname')." ".$smarty->get_template_vars('Lastname')."\n".$smarty->get_template_vars('Contact')."\n";
$email_message=new email_message_class;
$email_message->SetEncodedEmailHeader("To",$to_address,$to_name );
$email_message->SetEncodedEmailHeader("From",$from_address,$from_ name);
$email_message->SetEncodedEmailHeader("Reply-To",$reply_address,$reply_name);
/*
Set the Return-Path header to define the envelope sender address to which bounced messages are delivered.
If you are using Windows, you need to use the smtp_message_class to set the return-path address.
*/
if(defined("PHP_OS")
&& strcmp(substr(PHP_OS,0,3),"WIN"))
$email_message->SetHeader("Return-Path",$error_delivery_address);
$email_message->SetEncodedEmailHeader("Errors-To",$error_delivery_address,$error_delivery_name );
$email_message->SetEncodedHeader("Subject",$subject);
$email_message->AddQuotedPrintableTextPart($email_message->WrapText($message));
$error=$email_message->Send();
if(strcmp($error,""))
echo "Error: $error\n";
$smarty->display('success.tpl');
SmartyValidate::disconnect();
} else {
// error, redraw the form
$smarty->assign($_POST);
$smarty->display('kontakt.tpl');
}
};

?>


Here's an excerpt from kontakt.tpl (the part that breaks output):

<form method="post" action="kontakt.php">
{if $form_subject_Error or $form_message_Error or $form_firstname_Error or $form_lastname_Error or $form_sender_Error}<p>Ihre Nachricht konnte wegen einer <em>fehlenden</em> oder <em>falschen</em> Information noch nicht versendet werden. Die <span class="error">rot markierte Anmerkung</span> kennzeichnet das zu korrigierende Feld.</p>{else}{/if}
{validate id="form_firstname" message="Bitte geben Sie einen Vornamen an." assign="form_firstname_Error"}
<p><label for="Vorname" title="Pflichtfeld: Vorname">Ihr Vorname *</label><br />
{if $form_firstname_Error}<span class="error">{$form_firstname_Error}</span><br />{else}{/if}
<input type="text" name="Firstname" value="{$Firstname|escape}" id="Vorname" /></p>
{validate id="form_lastname" message="Bitte geben Sie einen Nachnamen an." assign="form_lastname_Error"}
<p><label for="Nachname" title="Pflichtfeld: Nachname">Ihr Nachname *</label><br />
{if $form_lastname_Error}<span class="error">{$form_lastname_Error}</span><br />{else}{/if}
<input type="text" name="Lastname" value="{$Lastname|escape}" id="Nachname" /></p>
{validate id="form_sender_empty" message="Bitte geben Sie eine E-mail-Adresse an." assign="form_sender_empty_Error"}
{validate id="form_sender_valid" message="Die E-mail-Adresse, die sie angegeben haben, ist keine gültige E-mail-Adresse." assign="form_sender_valid_Error"}
<p><label for="Sender" title="Pflichtfeld: E-Mail-Adresse">Ihre E-Mail-Adresse *</label><br />
{if $form_sender_empty_Error}<span class="error">{$form_sender_empty_Error}</span><br />{else}{/if}
{if $form_sender_valid_Error}<span class="error">{$form_sender_valid_Error}</span><br />{else}{/if}
<input type="text" name="Sender" size="30" value="{$Sender|escape}" id="Sender" /></p>
{validate id="form_subject" message="Bitte geben Sie einen Betreff ein." assign="form_subject_Error"}
<p><label for="Betreff" title="Pflichtfeld: Betreff">Betreff *</label><br />
{if $form_subject_Error}<span class="error">{$form_subject_Error}</span><br />{else}{/if}
<input type="text" name="Subject" value="{$Subject|escape}" id="Betreff" /></p>
{validate id="form_message" message="Bitte geben Sie eine Nachricht ein." assign="form_message_Error"}
<p><label for="Nachricht" title="Pflichtfeld: Mitteilung">Ihre Mitteilung an uns *</label><br />
{if $form_message_Error}<span class="error">{$form_message_Error}</span><br />{else}{/if}
<textarea name="Message" rows="10" cols="20" id="Nachricht">{$Message|escape}</textarea></p>
{validate id="form_contact" message="Bitte geben Sie Ihre Kontaktdaten an." assign="form_contact_Error"}
<p><label for="Kontaktdaten" title="Optionales Feld: Kontaktdaten">Ihre Kontaktdaten</label><br />
{if $form_contact_Error}<span class="error">{$form_contact_Error}</span><br />{else}{/if}
<textarea name="Contact" rows="4" cols="20" id="Kontaktdaten">{$Contact|escape}</textarea></p>
<p style="text-align:right;"><button type="submit" accesskey="s">abschicken</button></p>
</form>


--
state of mind
Agentur für Kommunikation und Design

Patrick Koetter Tel: 089 45227227
Echinger Strasse 3 Fax: 089 45227226
85386 Eching Web: http://www.state-of-mind.de

As always when you ask for you find the solution the second you've hit
"send"...

I hadn't copied the SmartyValidate libs to the Smarty-2.6.10 plugins dir.

p@rick



* Patrick Ben Koetter <p@state-of-mind.de>:
> Hi,
>
> I need assistance in debugging and fixing a problem I have with a contact
> form.
>
> Let me describe the setup first, because I think this is where things go
> astray:
>
> + On my development server things work, but they break on the target host.
>
> + The target host uses AFS. Templates are being compiled and once I give
> correct permissions to files in templates_c pages are displayed. I needed to
> disable caching though, but that's something the customer can live with.
>
> + The target hosts permits sessions. From reading the SmartyValidate README I
> believe this is required.
>
> I have very limited access to the machine. I can only access logs from the day
> before using a webinterface making it very hard to debug this for me.
>
> Here's what happens:
> If I leave the contact form and the corresponding kontakt.tpl the way they
> are, I get an empty page in the browser. The Server says "200 OK" and insists
> it delivered the page successfully. (The admin told me that...)
>
> If I remove any code starting from <form> through </form> - including any
> SmartyValidate calls - I can display the page without the form.
>
> In yesterdays error log I noted this:
>
> [Wed Jan 25 11:04:21 2006] [error] PHP Fatal error: Smarty error: [in
> kontakt.tpl line 20]: syntax error: unrecognized tag 'validate'
> (Smarty_Compiler.class.php, line 580) in
> /afs/--replaced--/webserver/Smarty/libs/Smarty.class.php on
> line 1088
>
> To me this means Smarty does not know what 'validate' should do, right?
> It loads Smarty.class.php, though. Registering? You see I am speculating.
> Something I hate to do. I'd rather measure...
>
> Any ideas what I can do?
>
> TIA,
>
> p@rick
>
>
>
> Here's the kontakt.php:
>
> <?php
> session_start();
> require('/afs/-- replaced -- /Smarty/libs/Smarty.class.php');
> require('/afs/-- replaced -- /Smarty/email_message.php');
> require('/afs/-- replaced -- /SmartyValidate/libs/SmartyValidate.class.php');
> $smarty = new Smarty();
> $smarty->template_dir = '/afs/-- replaced -- /webserver/smarty/templates';
> $smarty->compile_dir = '/afs/-- replaced -- /webserver/smarty/templates_c';
> $smarty->cache_dir = '/afs/-- replaced -- /webserver/smarty/cache';
> $smarty->config_dir = '/afs/-- replaced -- /webserver/smarty/configs';
> // $smarty->debugging = 'true';
>
> if(empty($_POST)) {
> // new form, we (re)set the session data
> SmartyValidate::connect($smarty, true);
> // register our validators
> SmartyValidate::register_validator('form_subject', 'Subject', 'notEmpty', false, false, 'trim');
> SmartyValidate::register_validator('form_message', 'Message', 'notEmpty', false, false, 'trim');
> SmartyValidate::register_validator('form_firstname ', 'Firstname', 'notEmpty', false, false, 'trim');
> SmartyValidate::register_validator('form_lastname' , 'Lastname', 'notEmpty', false, false, 'trim');
> SmartyValidate::register_validator('form_sender_em pty', 'Sender', 'notEmpty', false, false, 'trim');
> SmartyValidate::register_validator('form_sender_va lid', 'Sender', 'isEmail', false, false, 'trim');
> // display form
> $smarty->display('kontakt.tpl');
> } else {
> // validate after a POST
> SmartyValidate::connect($smarty);
> if(SmartyValidate::is_valid($_POST)) {
> $smarty->assign($_POST);
> // no errors, done with SmartyValidate
> $from_name=$smarty->get_template_vars('Firstname')." ".$smarty->get_template_vars('Lastname');
> $from_address=$smarty->get_template_vars('Sender');
> $reply_name=$from_name;
> $reply_address=$from_address;
> $reply_address=$from_address;
> $error_delivery_name=$from_name;
> $error_delivery_address=$from_address;
> $to_name="example";
> $to_address="john@example.com";
> $subject=$smarty->get_template_vars('Subject');
> $message="".$smarty->get_template_vars('Message')."\n\n--\n".$smarty->get_template_vars('Firstname')." ".$smarty->get_template_vars('Lastname')."\n".$smarty->get_template_vars('Contact')."\n";
> $email_message=new email_message_class;
> $email_message->SetEncodedEmailHeader("To",$to_address,$to_name );
> $email_message->SetEncodedEmailHeader("From",$from_address,$from_ name);
> $email_message->SetEncodedEmailHeader("Reply-To",$reply_address,$reply_name);
> /*
> Set the Return-Path header to define the envelope sender address to which bounced messages are delivered.
> If you are using Windows, you need to use the smtp_message_class to set the return-path address.
> */
> if(defined("PHP_OS")
> && strcmp(substr(PHP_OS,0,3),"WIN"))
> $email_message->SetHeader("Return-Path",$error_delivery_address);
> $email_message->SetEncodedEmailHeader("Errors-To",$error_delivery_address,$error_delivery_name );
> $email_message->SetEncodedHeader("Subject",$subject);
> $email_message->AddQuotedPrintableTextPart($email_message->WrapText($message));
> $error=$email_message->Send();
> if(strcmp($error,""))
> echo "Error: $error\n";
> $smarty->display('success.tpl');
> SmartyValidate::disconnect();
> } else {
> // error, redraw the form
> $smarty->assign($_POST);
> $smarty->display('kontakt.tpl');
> }
> };
>
> ?>
>
>
> Here's an excerpt from kontakt.tpl (the part that breaks output):
>
> <form method="post" action="kontakt.php">
> {if $form_subject_Error or $form_message_Error or $form_firstname_Error or $form_lastname_Error or $form_sender_Error}<p>Ihre Nachricht konnte wegen einer <em>fehlenden</em> oder <em>falschen</em> Information noch nicht versendet werden. Die <span class="error">rot markierte Anmerkung</span> kennzeichnet das zu korrigierende Feld.</p>{else}{/if}
> {validate id="form_firstname" message="Bitte geben Sie einen Vornamen an." assign="form_firstname_Error"}
> <p><label for="Vorname" title="Pflichtfeld: Vorname">Ihr Vorname *</label><br />
> {if $form_firstname_Error}<span class="error">{$form_firstname_Error}</span><br />{else}{/if}
> <input type="text" name="Firstname" value="{$Firstname|escape}" id="Vorname" /></p>
> {validate id="form_lastname" message="Bitte geben Sie einen Nachnamen an." assign="form_lastname_Error"}
> <p><label for="Nachname" title="Pflichtfeld: Nachname">Ihr Nachname *</label><br />
> {if $form_lastname_Error}<span class="error">{$form_lastname_Error}</span><br />{else}{/if}
> <input type="text" name="Lastname" value="{$Lastname|escape}" id="Nachname" /></p>
> {validate id="form_sender_empty" message="Bitte geben Sie eine E-mail-Adresse an." assign="form_sender_empty_Error"}
> {validate id="form_sender_valid" message="Die E-mail-Adresse, die sie angegeben haben, ist keine gültige E-mail-Adresse." assign="form_sender_valid_Error"}
> <p><label for="Sender" title="Pflichtfeld: E-Mail-Adresse">Ihre E-Mail-Adresse *</label><br />
> {if $form_sender_empty_Error}<span class="error">{$form_sender_empty_Error}</span><br />{else}{/if}
> {if $form_sender_valid_Error}<span class="error">{$form_sender_valid_Error}</span><br />{else}{/if}
> <input type="text" name="Sender" size="30" value="{$Sender|escape}" id="Sender" /></p>
> {validate id="form_subject" message="Bitte geben Sie einen Betreff ein." assign="form_subject_Error"}
> <p><label for="Betreff" title="Pflichtfeld: Betreff">Betreff *</label><br />
> {if $form_subject_Error}<span class="error">{$form_subject_Error}</span><br />{else}{/if}
> <input type="text" name="Subject" value="{$Subject|escape}" id="Betreff" /></p>
> {validate id="form_message" message="Bitte geben Sie eine Nachricht ein." assign="form_message_Error"}
> <p><label for="Nachricht" title="Pflichtfeld: Mitteilung">Ihre Mitteilung an uns *</label><br />
> {if $form_message_Error}<span class="error">{$form_message_Error}</span><br />{else}{/if}
> <textarea name="Message" rows="10" cols="20" id="Nachricht">{$Message|escape}</textarea></p>
> {validate id="form_contact" message="Bitte geben Sie Ihre Kontaktdaten an." assign="form_contact_Error"}
> <p><label for="Kontaktdaten" title="Optionales Feld: Kontaktdaten">Ihre Kontaktdaten</label><br />
> {if $form_contact_Error}<span class="error">{$form_contact_Error}</span><br />{else}{/if}
> <textarea name="Contact" rows="4" cols="20" id="Kontaktdaten">{$Contact|escape}</textarea></p>
> <p style="text-align:right;"><button type="submit" accesskey="s">abschicken</button></p>
> </form>
>
>
> --
> state of mind
> Agentur für Kommunikation und Design
>
> Patrick Koetter Tel: 089 45227227
> Echinger Strasse 3 Fax: 089 45227226
> 85386 Eching Web: http://www.state-of-mind.de
>
> --
> Smarty General Mailing List (http://smarty.php.net/)
> To unsubscribe, visit: http://www.php.net/unsub.php
>

--
state of mind
Agentur für Kommunikation und Design

Patrick Koetter Tel: 089 45227227
Echinger Strasse 3 Fax: 089 45227226
85386 Eching Web: http://www.state-of-mind.de

Make sure you install SmartyValidate completely, including its plugin files.

Patrick Ben Koetter wrote:

>As always when you ask for you find the solution the second you've hit
>"send"...
>
>I hadn't copied the SmartyValidate libs to the Smarty-2.6.10 plugins dir.
>
>p@rick
>
>
>
>* Patrick Ben Koetter <p@state-of-mind.de>:
>
>
>>Hi,
>>
>>I need assistance in debugging and fixing a problem I have with a contact
>>form.
>>
>>Let me describe the setup first, because I think this is where things go
>>astray:
>>
>>+ On my development server things work, but they break on the target host.
>>
>>+ The target host uses AFS. Templates are being compiled and once I give
>> correct permissions to files in templates_c pages are displayed. I needed to
>> disable caching though, but that's something the customer can live with.
>>
>>+ The target hosts permits sessions. From reading the SmartyValidate README I
>> believe this is required.
>>
>>I have very limited access to the machine. I can only access logs from the day
>>before using a webinterface making it very hard to debug this for me.
>>
>>Here's what happens:
>>If I leave the contact form and the corresponding kontakt.tpl the way they
>>are, I get an empty page in the browser. The Server says "200 OK" and insists
>>it delivered the page successfully. (The admin told me that...)
>>
>>If I remove any code starting from <form> through </form> - including any
>>SmartyValidate calls - I can display the page without the form.
>>
>>In yesterdays error log I noted this:
>>
>> [Wed Jan 25 11:04:21 2006] [error] PHP Fatal error: Smarty error: [in
>> kontakt.tpl line 20]: syntax error: unrecognized tag 'validate'
>> (Smarty_Compiler.class.php, line 580) in
>> /afs/--replaced--/webserver/Smarty/libs/Smarty.class.php on
>> line 1088
>>
>>To me this means Smarty does not know what 'validate' should do, right?
>>It loads Smarty.class.php, though. Registering? You see I am speculating.
>>Something I hate to do. I'd rather measure...
>>
>>Any ideas what I can do?
>>
>>TIA,
>>
>>p@rick
>>
>>
>>
>>Here's the kontakt.php:
>>
>><?php
>>session_start();
>>require('/afs/-- replaced -- /Smarty/libs/Smarty.class.php');
>>require('/afs/-- replaced -- /Smarty/email_message.php');
>>require('/afs/-- replaced -- /SmartyValidate/libs/SmartyValidate.class.php');
>>$smarty = new Smarty();
>>$smarty->template_dir = '/afs/-- replaced -- /webserver/smarty/templates';
>>$smarty->compile_dir = '/afs/-- replaced -- /webserver/smarty/templates_c';
>>$smarty->cache_dir = '/afs/-- replaced -- /webserver/smarty/cache';
>>$smarty->config_dir = '/afs/-- replaced -- /webserver/smarty/configs';
>>// $smarty->debugging = 'true';
>>
>> if(empty($_POST)) {
>> // new form, we (re)set the session data
>> SmartyValidate::connect($smarty, true);
>> // register our validators
>> SmartyValidate::register_validator('form_subject', 'Subject', 'notEmpty', false, false, 'trim');
>> SmartyValidate::register_validator('form_message', 'Message', 'notEmpty', false, false, 'trim');
>> SmartyValidate::register_validator('form_firstname ', 'Firstname', 'notEmpty', false, false, 'trim');
>> SmartyValidate::register_validator('form_lastname' , 'Lastname', 'notEmpty', false, false, 'trim');
>> SmartyValidate::register_validator('form_sender_em pty', 'Sender', 'notEmpty', false, false, 'trim');
>> SmartyValidate::register_validator('form_sender_va lid', 'Sender', 'isEmail', false, false, 'trim');
>> // display form
>> $smarty->display('kontakt.tpl');
>> } else {
>> // validate after a POST
>> SmartyValidate::connect($smarty);
>> if(SmartyValidate::is_valid($_POST)) {
>> $smarty->assign($_POST);
>> // no errors, done with SmartyValidate
>> $from_name=$smarty->get_template_vars('Firstname')." ".$smarty->get_template_vars('Lastname');
>> $from_address=$smarty->get_template_vars('Sender');
>> $reply_name=$from_name;
>> $reply_address=$from_address;
>> $reply_address=$from_address;
>> $error_delivery_name=$from_name;
>> $error_delivery_address=$from_address;
>> $to_name="example";
>> $to_address="john@example.com";
>> $subject=$smarty->get_template_vars('Subject');
>> $message="".$smarty->get_template_vars('Message')."\n\n--\n".$smarty->get_template_vars('Firstname')." ".$smarty->get_template_vars('Lastname')."\n".$smarty->get_template_vars('Contact')."\n";
>> $email_message=new email_message_class;
>> $email_message->SetEncodedEmailHeader("To",$to_address,$to_name );
>> $email_message->SetEncodedEmailHeader("From",$from_address,$from_ name);
>> $email_message->SetEncodedEmailHeader("Reply-To",$reply_address,$reply_name);
>>/*
>> Set the Return-Path header to define the envelope sender address to which bounced messages are delivered.
>> If you are using Windows, you need to use the smtp_message_class to set the return-path address.
>>*/
>> if(defined("PHP_OS")
>> && strcmp(substr(PHP_OS,0,3),"WIN"))
>> $email_message->SetHeader("Return-Path",$error_delivery_address);
>> $email_message->SetEncodedEmailHeader("Errors-To",$error_delivery_address,$error_delivery_name );
>> $email_message->SetEncodedHeader("Subject",$subject);
>> $email_message->AddQuotedPrintableTextPart($email_message->WrapText($message));
>> $error=$email_message->Send();
>> if(strcmp($error,""))
>> echo "Error: $error\n";
>> $smarty->display('success.tpl');
>> SmartyValidate::disconnect();
>> } else {
>> // error, redraw the form
>> $smarty->assign($_POST);
>> $smarty->display('kontakt.tpl');
>> }
>> };
>>
>>?>
>>
>>
>>Here's an excerpt from kontakt.tpl (the part that breaks output):
>>
>> <form method="post" action="kontakt.php">
>> {if $form_subject_Error or $form_message_Error or $form_firstname_Error or $form_lastname_Error or $form_sender_Error}<p>Ihre Nachricht konnte wegen einer <em>fehlenden</em> oder <em>falschen</em> Information noch nicht versendet werden. Die <span class="error">rot markierte Anmerkung</span> kennzeichnet das zu korrigierende Feld.</p>{else}{/if}
>> {validate id="form_firstname" message="Bitte geben Sie einen Vornamen an." assign="form_firstname_Error"}
>> <p><label for="Vorname" title="Pflichtfeld: Vorname">Ihr Vorname *</label><br />
>> {if $form_firstname_Error}<span class="error">{$form_firstname_Error}</span><br />{else}{/if}
>> <input type="text" name="Firstname" value="{$Firstname|escape}" id="Vorname" /></p>
>> {validate id="form_lastname" message="Bitte geben Sie einen Nachnamen an." assign="form_lastname_Error"}
>> <p><label for="Nachname" title="Pflichtfeld: Nachname">Ihr Nachname *</label><br />
>> {if $form_lastname_Error}<span class="error">{$form_lastname_Error}</span><br />{else}{/if}
>> <input type="text" name="Lastname" value="{$Lastname|escape}" id="Nachname" /></p>
>> {validate id="form_sender_empty" message="Bitte geben Sie eine E-mail-Adresse an." assign="form_sender_empty_Error"}
>> {validate id="form_sender_valid" message="Die E-mail-Adresse, die sie angegeben haben, ist keine gültige E-mail-Adresse." assign="form_sender_valid_Error"}
>> <p><label for="Sender" title="Pflichtfeld: E-Mail-Adresse">Ihre E-Mail-Adresse *</label><br />
>> {if $form_sender_empty_Error}<span class="error">{$form_sender_empty_Error}</span><br />{else}{/if}
>> {if $form_sender_valid_Error}<span class="error">{$form_sender_valid_Error}</span><br />{else}{/if}
>> <input type="text" name="Sender" size="30" value="{$Sender|escape}" id="Sender" /></p>
>> {validate id="form_subject" message="Bitte geben Sie einen Betreff ein." assign="form_subject_Error"}
>> <p><label for="Betreff" title="Pflichtfeld: Betreff">Betreff *</label><br />
>> {if $form_subject_Error}<span class="error">{$form_subject_Error}</span><br />{else}{/if}
>> <input type="text" name="Subject" value="{$Subject|escape}" id="Betreff" /></p>
>> {validate id="form_message" message="Bitte geben Sie eine Nachricht ein." assign="form_message_Error"}
>> <p><label for="Nachricht" title="Pflichtfeld: Mitteilung">Ihre Mitteilung an uns *</label><br />
>> {if $form_message_Error}<span class="error">{$form_message_Error}</span><br />{else}{/if}
>> <textarea name="Message" rows="10" cols="20" id="Nachricht">{$Message|escape}</textarea></p>
>> {validate id="form_contact" message="Bitte geben Sie Ihre Kontaktdaten an." assign="form_contact_Error"}
>> <p><label for="Kontaktdaten" title="Optionales Feld: Kontaktdaten">Ihre Kontaktdaten</label><br />
>> {if $form_contact_Error}<span class="error">{$form_contact_Error}</span><br />{else}{/if}
>> <textarea name="Contact" rows="4" cols="20" id="Kontaktdaten">{$Contact|escape}</textarea></p>
>> <p style="text-align:right;"><button type="submit" accesskey="s">abschicken</button></p>
>> </form>
>>
>>
>>--
>>state of mind
>>Agentur für Kommunikation und Design
>>
>>Patrick Koetter Tel: 089 45227227
>>Echinger Strasse 3 Fax: 089 45227226
>>85386 Eching Web: http://www.state-of-mind.de
>>
>>--
>>Smarty General Mailing List (http://smarty.php.net/)
>>To unsubscribe, visit: http://www.php.net/unsub.php
>>
>>
>>
>
>
>