Thanks Krzysztof and Andrei,

I've changed both parameters; the mouse configuration
is now the same as in Etch where it works.

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
EndSection

The Etch configuration ends with these three
lines, absent from Lenny.

Section "DRI"
Mode 0666
EndSection

Perhaps I should add them. Any ideas?

Thanks again, ... Peter E.



--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

On Sun, Aug 19, 2007 at 12:23:55PM -0700, Peter Easthope wrote:
> Thanks Krzysztof and Andrei,
>
> I've changed both parameters; the mouse configuration
> is now the same as in Etch where it works.

So I presume it's still not working?

> The Etch configuration ends with these three
> lines, absent from Lenny.
>
> Section "DRI"
> Mode 0666
> EndSection
>
> Perhaps I should add them. Any ideas?

These are definitely not related. What xorg packages do you have
installed? (dpkg -l xorg*)

Regards,
Andrei
--
If you can't explain it simply, you don't understand it well enough.
(Albert Einstein)

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)

iD8DBQFGyKjaqJyztHCFm9kRAtbEAJwJdxq3jBfNQDmfgeHkn3 UJnO9KhQCgtq/K
gRgwCnlKVcAzMBhZDXZFO3Q=
=2qaq
-----END PGP SIGNATURE-----

On Sun, Aug 19, 2007 at 12:23:55PM -0700, Peter Easthope wrote:
> Thanks Krzysztof and Andrei,
>
> I've changed both parameters; the mouse configuration
> is now the same as in Etch where it works.

So I presume it's still not working?

> The Etch configuration ends with these three
> lines, absent from Lenny.
>
> Section "DRI"
> Mode 0666
> EndSection
>
> Perhaps I should add them. Any ideas?

These are definitely not related. What xorg packages do you have
installed? (dpkg -l xorg*)

Regards,
Andrei
--
If you can't explain it simply, you don't understand it well enough.
(Albert Einstein)

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)

iD8DBQFGyKjaqJyztHCFm9kRAtbEAJwJdxq3jBfNQDmfgeHkn3 UJnO9KhQCgtq/K
gRgwCnlKVcAzMBhZDXZFO3Q=
=2qaq
-----END PGP SIGNATURE-----

On Sun, Aug 19, 2007 at 23:32:26 +0300, Andrei Popescu wrote:
> On Sun, Aug 19, 2007 at 12:23:55PM -0700, Peter Easthope wrote:
> > Thanks Krzysztof and Andrei,
> >
> > I've changed both parameters; the mouse configuration
> > is now the same as in Etch where it works.
>
> So I presume it's still not working?
>
> > The Etch configuration ends with these three
> > lines, absent from Lenny.
> >
> > Section "DRI"
> > Mode 0666
> > EndSection
> >
> > Perhaps I should add them. Any ideas?
>
> These are definitely not related. What xorg packages do you have
> installed? (dpkg -l xorg*)

I would also like to know the result of

dmesg | grep input

(right after you boot the machine) and the output of

ls -l /dev/input/by-id

If the latter command does not list any mouse device then it might
to "modprobe psmouse" (or "modprobe sermouse" if it is a really old
mouse).

--
Regards, | http://users.icfo.es/Florian.Kulzer
Florian |


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org