Hello,

I don't get wlan with wpa working on my powerbook g4 with etch.

This is the lspci output:

0001:10:12:0 Network controller: Broadcom Corporation BCM4306 802.11b/g
Wireless LAN Controller (rev 03)

This is my /etc/network/interfaces file:

auto eth2
iface eth2 inet manual
wpa-sriver wext
wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf

iface office inet dhcp

iface anywhere inet dhcp

This is my /etc/wpa_supplicant/wpa_supplicant.conf:

ctrl_interface=/var/run/wpa_supplicant

network={
id_str="office"
ssid="gh-office-wlan" # = airport network name
psk="64-byte hex-string obtained with wpa_passphrase"
}

network={
id_str="anywhere"
ssid=""
key_mgmt=NONE
}

The network-admin says "wireless network eth2 active" but under
properties, the network is not selected. It appears in the pop-up menu
though and I can select it, but afterwards ping returns "network unreachable".
There is no wpa_action.log file in /var/log.

Any ideas?
Thanks in advance,

G. Heinrich



--
To UNSUBSCRIBE, email to debian-laptop-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

hi,

Georg Heinrich wrote:
> I don't get wlan with wpa working on my powerbook g4 with etch.

you probably need bcm43xxx-fwcutter package. i wrote up how i got mine
working: http://travelsoforion.net/debian-wireless

--asm

> This is the lspci output:
>
> 0001:10:12:0 Network controller: Broadcom Corporation BCM4306 802.11b/g
> Wireless LAN Controller (rev 03)
>
> This is my /etc/network/interfaces file:
>
> auto eth2
> iface eth2 inet manual
> wpa-sriver wext
> wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf
>
> iface office inet dhcp
>
> iface anywhere inet dhcp
>
> This is my /etc/wpa_supplicant/wpa_supplicant.conf:
>
> ctrl_interface=/var/run/wpa_supplicant
>
> network={
> id_str="office"
> ssid="gh-office-wlan" # = airport network name
> psk="64-byte hex-string obtained with wpa_passphrase"
> }
>
> network={
> id_str="anywhere"
> ssid=""
> key_mgmt=NONE
> }
>
> The network-admin says "wireless network eth2 active" but under
> properties, the network is not selected. It appears in the pop-up menu
> though and I can select it, but afterwards ping returns "network unreachable".
> There is no wpa_action.log file in /var/log.
>
> Any ideas?
> Thanks in advance,
>
> G. Heinrich
>
>
>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFGX7MlDSUj23OxwYIRAttGAJ9B6+iDUglYiKtQxCTSo4 Ue049ttgCaAyt1
4OQzNl8d0O9xO6CA5+FUjTU=
=kYYw
-----END PGP SIGNATURE-----


--
To UNSUBSCRIBE, email to debian-laptop-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

On 6/1/07, Georg Heinrich <georg.heinrich@gh-blue.de> wrote:
> Hello,
>
> I don't get wlan with wpa working on my powerbook g4 with etch.
>
> This is the lspci output:
>
> 0001:10:12:0 Network controller: Broadcom Corporation BCM4306 802.11b/g
> Wireless LAN Controller (rev 03)
>
> This is my /etc/network/interfaces file:
>
> auto eth2
> iface eth2 inet manual
> wpa-sriver wext

wpa-driver ?? It's a "d" ?

Best regards,
Bin

> wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf
>
> iface office inet dhcp
>
> iface anywhere inet dhcp
>
> This is my /etc/wpa_supplicant/wpa_supplicant.conf:
>
> ctrl_interface=/var/run/wpa_supplicant
>
> network={
> id_str="office"
> ssid="gh-office-wlan" # = airport network name
> psk="64-byte hex-string obtained with wpa_passphrase"
> }
>
> network={
> id_str="anywhere"
> ssid=""
> key_mgmt=NONE
> }
>
> The network-admin says "wireless network eth2 active" but under
> properties, the network is not selected. It appears in the pop-up menu
> though and I can select it, but afterwards ping returns "network unreachable".
> There is no wpa_action.log file in /var/log.
>
> Any ideas?
> Thanks in advance,
>
> G. Heinrich
>
>
>
> --
> To UNSUBSCRIBE, email to debian-powerpc-REQUEST@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
>
>


--
To UNSUBSCRIBE, email to debian-laptop-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org