I just bought a dell dimension e520, and after some struggle, I
finally installed it.
But still got a problem, X11 is not coming up.
I'm a little tired of searching and solving installation problems, and
that's why I'm looking for without many search about this one.
Copied the log here:


X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
Build Operating System: UNKNOWN
Current Operating System: Linux henrique 2.6.18-4-686 #1 SMP Wed Feb
21 16:06:54 UTC 2007 i686
Build Date: 07 March 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 26 21:11:36 2007
(==) Using config file: "/etc/X11/xorg.conf"
(WW) I810: No matching Device section for instance (BusID PCI:0:2:1) found
(EE) GARTInit: Unable to open /dev/agpgart (No such file or directory)
(EE) I810(0): Failed to allocate framebuffer. Is your VideoRAM set too low ??

Fatal server error:
AddScreen/ScreenInit failed for driver 0


I'm using lastest debian etch. Thanks in advance.

--
Henrique G. Abreu
henrique@turbokit.com.br


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Henrique G. Abreu escribió:
> I just bought a dell dimension e520, and after some struggle, I
> finally installed it.
> But still got a problem, X11 is not coming up.
> I'm a little tired of searching and solving installation problems, and
> that's why I'm looking for without many search about this one.
> Copied the log here:

Have you already tried `vesa'?

Jose Luis,
- --

ghostbar @ linux/debian 'sid' x86 - #382503
WeBlog: http://ghostbar.ath.cx/ - http://talug.org.ve
http://debian.org.ve - irc.debian.org #debian-ve
San Cristóbal, Venezuela.
Fingerprint = 3E7D 4267 AFD5 2407 2A37 20AC 38A0 AD5B CACA B118
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)

iD8DBQFGCPK5OKCtW8rKsRgRAhTkAKDIGd9MJrQ24wXkOCB8Yh h5bhehRgCfWXWT
FhZkV3kb6025s+MGr8QXIEc=
=cO/G
-----END PGP SIGNATURE-----


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

I'm on the same situation.

vesa driver works in e520 configuration but this is not the solution because
of its low performance (I'm using it now)

After lot of Googling, I tried to modprobe intel agp modules and I tried to
create by hand /dev/agpgp - all unsuccessfully. No way by now.

I have stopped the investigation but I'm very interested in this issue.
>
>
>

On Tuesday 27 March 2007 07:21, Platff wrote:
> I'm on the same situation.
>
> vesa driver works in e520 configuration but this is not the solution
> because of its low performance (I'm using it now)
>
> After lot of Googling, I tried to modprobe intel agp modules and I tried to
> create by hand /dev/agpgp - all unsuccessfully. No way by now.
>
> I have stopped the investigation but I'm very interested in this issue.

You'll need the intel-agp driver from 2.6.19 at least. Once it is updated,
it'll recognize your device. I managed to work around the problem by d/l the
source package for the etch kernel, dropping the intel-agp.c file from a
newer vanilla kernel into it, and building the kernel the "debian way" (or
just d/l the latest vanilla kernel and go at it.)

The VESA driver will work (poorly, but much better than nothing.) For the i810
driver to work, you might need to use the sources from freedesktop.org:
http://intellinuxgraphics.org./download.html


Hopefully you will avoid the problem I'm currently experiencing with the 2d
driver sources: https://bugs.freedesktop.org/show_bug.cgi?id=10430
In this case, it's probably just a pebkac error.

Regards,

Anson


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

Thanks very everyone for the .
But, as I said, I am a bit tired of installation. got many problems
with sata controler and later with the network driver.
I'll use vesa driver until kernel 2.6.19 comes to etch.
For now, I'll focus now on making the sound works. arrr...

On 3/28/07, Anson Gardner <ansongardner@poncacity.net> wrote:
> On Tuesday 27 March 2007 07:21, Platff wrote:
> > I'm on the same situation.
> >
> > vesa driver works in e520 configuration but this is not the solution
> > because of its low performance (I'm using it now)
> >
> > After lot of Googling, I tried to modprobe intel agp modules and I tried to
> > create by hand /dev/agpgp - all unsuccessfully. No way by now.
> >
> > I have stopped the investigation but I'm very interested in this issue.
>
> You'll need the intel-agp driver from 2.6.19 at least. Once it is updated,
> it'll recognize your device. I managed to work around the problem by d/l the
> source package for the etch kernel, dropping the intel-agp.c file from a
> newer vanilla kernel into it, and building the kernel the "debian way" (or
> just d/l the latest vanilla kernel and go at it.)
>
> The VESA driver will work (poorly, but much better than nothing.) For the i810
> driver to work, you might need to use the sources from freedesktop.org:
> http://intellinuxgraphics.org./download.html
>
>
> Hopefully you will avoid the problem I'm currently experiencing with the 2d
> driver sources: https://bugs.freedesktop.org/show_bug.cgi?id=10430
> In this case, it's probably just a pebkac error.
>
> Regards,
>
> Anson
>
>
> --
> To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
>
>



--
Henrique G. Abreu
henrique@turbokit.com.br


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Henrique G. Abreu escribió:
> Thanks very everyone for the .
> But, as I said, I am a bit tired of installation. got many problems
> with sata controler and later with the network driver.
> I'll use vesa driver until kernel 2.6.19 comes to etch.
> For now, I'll focus now on making the sound works. arrr...

Hmm... Just be sure of getting audio permissions to your user . I've
seen that a lot.

Jose Luis,
- --

ghostbar @ linux/debian 'sid' x86 - #382503
WeBlog: http://ghostbar.ath.cx/ - http://talug.org.ve
http://debian.org.ve - irc.debian.org #debian-ve
San Cristóbal, Venezuela.
Fingerprint = 3E7D 4267 AFD5 2407 2A37 20AC 38A0 AD5B CACA B118
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)

iD8DBQFGDsRXOKCtW8rKsRgRAnGiAKC5yswYccN2GVX2ZOYuTA JMKs9JmwCdGPTt
DNJM4DN7By5BT6jb/YLjRqs=
=4s1Y
-----END PGP SIGNATURE-----


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org