> Date: Thu, 8 Mar 2007 23:07:18 -0800
> rhelas rhelas wrote:

> > shut ur mouth.

> >> > Freddy Freeloader <fredddy@cableone.net> wrote: On Thu, 2007-03-08 at 10:09 -0800, Andrew Sackville-West wrote:> > > >> On Thu, Mar 08, 2007 at05:23:15PM +0100, Ben Humpert wrote:> >> > >>> Hi,> >>> > >>> since im using Debian, the installer is not able to find the sata-controller used in DELL PowerEdge 850 and 860 Servers. i started with 31r0a and currently tried it with 31r5, each was 32bit for i386. Now im trying the 31r5 for ia64 (server is capable of that).> >>> > >>> > >> use the etch installer. sarge doesn't generally support SATA while> >> etch does. Etch will be released "any time now" and is already getting> >> security support and is very usable. >>>> >> A> >> > >> > Agreed. I just did an Etch install on a server with SATA drives. I> > used the daily build of the Etch installer from the 5th of this month> > and it went flawlessly. The Etch installer is one of the best> > installers out there as far as I'm concerned. > >> >> > > So this is how you answer a response to your post about the problem you > had with the Sarge installer? I add my verification of what Andrew > said so you'll have more than one source for the advice, and this is > your response? > > Wow. What a guy. You can bet I won't be answering any more of your > requests for .

That wasn't me! Im Ben Humpert and not rhelas rhelas. Please send us the email of rhelas rhelas so we all can add him to blacklist. Thanks

And the reason why im not answered to all the responses till now is that imstill have various problems with installing etch on my 860 but the problems doesnt belong to debian itself, looks more like a routing/hardware problem of the server. I just want to finish the installation OR want to wait until i get a debian error so i dont have to write more than one mail. more than one would be useless.

Ben Humpert wrote:
>> Date: Thu, 8 Mar 2007 23:07:18 -0800
>> rhelas rhelas wrote:
>>
>
>
>>> shut ur mouth.
>>>
>
>
>>>>> Freddy Freeloader <fredddy@cableone.net> wrote: On Thu, 2007-03-08 at 10:09 -0800, Andrew Sackville-West wrote:> > > >> On Thu, Mar 08, 2007at 05:23:15PM +0100, Ben Humpert wrote:> >> > >>> Hi,> >>> > >>> since im using Debian, the installer is not able to find the sata-controller used in DELL PowerEdge 850 and 860 Servers. i started with 31r0a and currently tried it with 31r5, each was 32bit for i386. Now im trying the 31r5 for ia64 (server is capable of that).> >>> > >>> > >> use the etch installer. sarge doesn't generally support SATA while> >> etch does. Etch will bereleased "any time now" and is already getting> >> security support and is very usable. > >>> >> A> >> > >> > Agreed. I just did an Etch install on a server with SATA drives. I> > used the daily build of the Etch installer from the 5th of this month> > and it went flawlessly. The Etch installer is one of the best> > installers out there as far as I'm concerned. > >> >> > > So this is how you answer a response to your post about the problem you > had with the Sarge installer? I add my verification of what Andrew > said so you'll have more than one source for the advice, and this is > your response? > > Wow. What a guy. You can bet I won't be answering any more of your > requests for .
>>>>>
>
> That wasn't me! Im Ben Humpert and not rhelas rhelas. Please send us the email of rhelas rhelas so we all can add him to blacklist. Thanks
>
> And the reason why im not answered to all the responses till now is that im still have various problems with installing etch on my 860 but the problems doesnt belong to debian itself, looks more like a routing/hardware problem of the server. I just want to finish the installation OR want to wait until i get a debian error so i dont have to write more than one mail. more than one would be useless.
>
Sorry Ben,

I didn't even look at the chain, just the message. It was so illogical
that some idiot would jump into a thread where I was wanting to be
ful that I didn't even think about the possibility that it was
someone completely unrelated to the thread.

Ummm.... I do have a question though. Just who, and where, are you
referring to when you say, "send us the message"?

Freddy Freeloader wrote:

>>>> shut ur mouth.

> Ummm.... I do have a question though. Just who, and where, are you
> referring to when you say, "send us the message"?

Sorry for jumping in. I guess it's the one with the 'shut ur mouth'. I
can't find it in the thread.

Johannes


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

Johannes Wiedersich wrote:
> Freddy Freeloader wrote:
>
>
>>>>> shut ur mouth.
>>>>>
>
>
>> Ummm.... I do have a question though. Just who, and where, are you
>> referring to when you say, "send us the message"?
>>
>
> Sorry for jumping in. I guess it's the one with the 'shut ur mouth'. I
> can't find it in the thread.
>
> Johannes
>
>
>
It was sent directly to me, not the list.


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org