Salutation a tous et bonne année 2010.

Déjà ça commence bien...

Je souhaite utiliser la commande snmpwalk sur le port 3401 (squid).

Mais ou est donc passé l'option -p sur la nouvelle version 5.4.1 ???

snmpwalk -h

USAGE: snmpwalk [OPTIONS] AGENT [OID]

Version: 5.4.1
Web: http://www.net-snmp.org/
Email: net-snmp-coders@lists.sourceforge.net

OPTIONS:
-h, -- display this message
-H display configuration file directives understood
-v 1|2c|3 specifies SNMP version to use
-V, --version display package version number
SNMP Version 1 or 2c specific
-c COMMUNITY set the community string
SNMP Version 3 specific
-a PROTOCOL set authentication protocol (MD5|SHA)
-A PASSPHRASE set authentication protocol pass phrase
-e ENGINE-ID set security engine ID (e.g. 800000020109840301)
-E ENGINE-ID set context engine ID (e.g. 800000020109840301)
-l LEVEL set security level (noAuthNoPriv|authNoPriv|
authPriv)
-n CONTEXT set context name (e.g. bridge1)
-u USER-NAME set security name (e.g. bert)
-x PROTOCOL set privacy protocol (DES|AES)
-X PASSPHRASE set privacy protocol pass phrase
-Z BOOTS,TIME set destination engine boots/time
General communication options
-r RETRIES set the number of retries
-t TIMEOUT set the request timeout (in seconds)
Debugging
-d dump input/output packets in hexadecimal
-D TOKEN[,...] turn on debugging output for the specified TOKENs
(ALL gives extremely verbose debugging output)
General options
-m MIB[:...] load given list of MIBs (ALL loads everything)
-M DIR[:...] look in given list of directories for MIBs
-P MIBOPTS Toggle various defaults controlling MIB parsing:
u: allow the use of underlines in MIB symbols
c: disallow the use of "--" to terminate
comments
d: save the DESCRIPTIONs of the MIB objects
e: disable errors when MIB symbols conflict
w: enable warnings when MIB symbols conflict
W: enable detailed warnings when MIB symbols
conflict
R: replace MIB symbols from latest module
-O OUTOPTS Toggle various defaults controlling output
display:
0: print leading 0 for single-digit hex
characters
a: print all strings in ascii format
b: do not break OID indexes down
e: print enums numerically
E: escape quotes in string indices
f: print full OIDs on output
n: print OIDs numerically
q: quick print for easier parsing
Q: quick print with equal-signs
s: print only last symbolic element of OID
S: print MIB module-id plus last element
t: print timeticks unparsed as numeric integers
T: print human-readable text along with hex
strings
u: print OIDs using UCD-style prefix
suppression
U: don't print units
v: print values only (not OID = value)
x: print all strings in hex format
X: extended index format
-I INOPTS Toggle various defaults controlling input parsing:
b: do best/regex matching to find a MIB node
h: don't apply DISPLAY-HINTs
r: do not check values for range/type legality
R: do random access to OID labels
u: top-level OIDs must have '.' prefix (UCD-
style)
s SUFFIX: Append all textual OIDs with SUFFIX
before parsing
S PREFIX: Prepend all textual OIDs with PREFIX
before parsing
-L LOGOPTS Toggle various defaults controlling logging:
e: log to standard error
o: log to standard output
n: don't log at all
f file: log to the specified file
s facility: log to syslog (via the specified
facility)

(variants)
[EON] pri: log to standard error, output or /
dev/null for level 'pri' and above
[EON] p1-p2: log to standard error, output or /
dev/null for levels 'p1' to 'p2'
[FS] pri token: log to file/syslog for level
'pri' and above
[FS] p1-p2 token: log to file/syslog for
levels 'p1' to 'p2'
-C APPOPTS Set various application specific behaviours:
p: print the number of variables found
i: include given OID in the search range
I: don't include the given OID, even if no
results are returned
c: do not check returned OIDs are increasing
t: Display wall-clock time to complete the
request

Playload wrote in message <4b3e47ea$0$5245$426a34cc@news.free.fr>:
> Mais ou est donc passé l'option -p sur la nouvelle version 5.4.1 ???

Cherche «-p» dans le ChangeLog, c'est le meilleur moyen d'avoir la réponse
à ce genre de question.

Merci Nicolas, j'ai trouvé sur le site
http://www.net-snmp.org/about/ChangeLog.html


*5.0*
New:

Note: the -p and -T flags to all the applications have been
removed. Use hostname strings like "tcp:localhost:9999"
instead. See the snmpcmd manual page for details.

Bye...

Playload wrote in message <4b3e4e32$0$17832$426a74cc@news.free.fr>:
> net-snmp (5.4.1~dfsg-12ubuntu7) karmic; urgency=low
>
> * debian/patches/99-fix-ubuntu-div0.patch: Fix division by zero.
> (LP: #426813).
>
> -- Chuck Short <zulcss@ubuntu.com> Mon, 28 Sep 2009 14:02:16 -0400

Pour référence (puisque je vois que tu avais trouvé; j'avais préalablement
vérifié que l'information était effectivement trouvable ainsi), ceci est le
ChangeLog du paquet Debian, il référence les changements dans la manière
dont le paquet est packagé. Les changements dans le logiciel lui-même y
apparaissent uniquement sous la forme:

* New upstream version (closes: #147761).

Encore merci pour toutes ces infos.

oups, effectivement, c'est bien le changelog du paquet Debian.

Bye.