Anyone had any luck building from source on the newly released Mac OS
X Leopard?

A "./configure && make" with MySQL 5.0.45 bails for me while trying to
make the mysys target; this is on an Intel Mac:

ranlib: archive member: libmysys.a(my_new.o) cputype (7) does not
match previous archive members cputype (18) (all members must match)
ranlib: archive member: libmysys.a(raid.o) cputype (7) does not match
previous archive members cputype (18) (all members must match)
ranlib libmysys.a
ranlib: archive member: libmysys.a(my_new.o) cputype (7) does not
match previous archive members cputype (18) (all members must match)
ranlib: archive member: libmysys.a(raid.o) cputype (7) does not match
previous archive members cputype (18) (all members must match)
ranlib: for architecture: ppc file: libmysys.a(my_getpagesize.o) has
no symbols
ranlib: for architecture: ppc file: libmysys.a(my_crc32.o) has no
symbols
ranlib: for architecture: ppc file: libmysys.a(mf_brkhant.o) has no
symbols
ranlib: for architecture: ppc file: libmysys.a(my_lockmem.o) has no
symbols
ranlib: for architecture: ppc file: libmysys.a(my_port.o) has no
symbols
ranlib: for architecture: ppc file: libmysys.a(my_netware.o) has no
symbols
ranlib: for architecture: ppc file: libmysys.a(my_largepage.o) has no
symbols
ranlib: for architecture: ppc file: libmysys.a(my_windac.o) has no
symbols
ranlib: for architecture: ppc file: libmysys.a(my_access.o) has no
symbols
ranlib: for architecture: ppc file: libmysys.a(my_libwrap.o) has no
symbols
ranlib: for architecture: ppc file: libmysys.a(thr_mutex.o) has no
symbols
ranlib: for architecture: ppc file: libmysys.a(thr_rwlock.o) has no
symbols
ranlib: for architecture: i386 file: libmysys.a(my_new.o) has no
symbols
ranlib: for architecture: i386 file: libmysys.a(raid.o) has no symbols
ranlib: warning for library: libmysys.a for architecture: i386 the
table of contents is empty (no object file members in the library
define global symbols)
make[2]: *** [libmysys.a] Error 1
make[1]: *** [all-recursive] Error 1
make: *** [all] Error 2

I later tried exporting "-arch i386" (my local native arch) in the
ARCHFLAGS environment variable but that just got a bit further before
giving me different errors:

ld: warning in ../myisam/libmyisam.a, file is not of required
architecture
ld: warning in ../myisammrg/libmyisammrg.a, file is not of required
architecture
ld: warning in ../heap/libheap.a, file is not of required architecture
ld: warning in ../vio/libvio.a, file is not of required architecture
ld: warning in ../dbug/libdbug.a, file is not of required architecture
ld: warning in ../regex/libregex.a, file is not of required
architecture
ld: warning in ../strings/libmystrings.a, file is not of required
architecture
Undefined symbols:
"_my_fopen", referenced from:
tz_load(char const*, st_time_zone_info*, st_mem_root*)in
mysql_tzinfo_to_sql.o
"_my_init", referenced from:
_main in mysql_tzinfo_to_sql.o
"_my_dirend", referenced from:
scan_tz_dir(char*) in mysql_tzinfo_to_sql.o
scan_tz_dir(char*) in mysql_tzinfo_to_sql.o
"_init_alloc_root", referenced from:
scan_tz_dir(char*) in mysql_tzinfo_to_sql.o
_main in mysql_tzinfo_to_sql.o
"_strmake", referenced from:
scan_tz_dir(char*) in mysql_tzinfo_to_sql.o
scan_tz_dir(char*) in mysql_tzinfo_to_sql.o
_main in mysql_tzinfo_to_sql.o
"_my_fread", referenced from:
tz_load(char const*, st_time_zone_info*, st_mem_root*)in
mysql_tzinfo_to_sql.o
"_my_progname", referenced from:
_my_progname$non_lazy_ptr in mysql_tzinfo_to_sql.o
"_my_dir", referenced from:
scan_tz_dir(char*) in mysql_tzinfo_to_sql.o
"_alloc_root", referenced from:
tz_load(char const*, st_time_zone_info*, st_mem_root*)in
mysql_tzinfo_to_sql.o
tz_load(char const*, st_time_zone_info*, st_mem_root*)in
mysql_tzinfo_to_sql.o
tz_load(char const*, st_time_zone_info*, st_mem_root*)in
mysql_tzinfo_to_sql.o
"_my_fclose", referenced from:
tz_load(char const*, st_time_zone_info*, st_mem_root*)in
mysql_tzinfo_to_sql.o
"_free_root", referenced from:
scan_tz_dir(char*) in mysql_tzinfo_to_sql.o
_main in mysql_tzinfo_to_sql.o
ld: symbol(s) not found
collect2: ld returned 1 exit status
make[4]: *** [mysql_tzinfo_to_sql] Error 1
make[3]: *** [all-recursive] Error 1
make[2]: *** [all] Error 2
make[1]: *** [all-recursive] Error 1
make: *** [all] Error 2

Cheers,
Wincent

In article <1193775756.557762.209250@v3g2000hsg.googlegroups. com>,
Wincent Colaiuta <win@wincent.com> wrote:

> Anyone had any luck building from source on the newly released Mac OS
> X Leopard?
>
> A "./configure && make" with MySQL 5.0.45 bails for me while trying to
> make the mysys target; this is on an Intel Mac:
>
> ranlib: archive member: libmysys.a(my_new.o) cputype (7) does not
> match previous archive members cputype (18) (all members must match)
> ranlib: archive member: libmysys.a(raid.o) cputype (7) does not match
> previous archive members cputype (18) (all members must match)
> ranlib libmysys.a
> ranlib: archive member: libmysys.a(my_new.o) cputype (7) does not
> match previous archive members cputype (18) (all members must match)
> ranlib: archive member: libmysys.a(raid.o) cputype (7) does not match
> previous archive members cputype (18) (all members must match)
> ranlib: for architecture: ppc file: libmysys.a(my_getpagesize.o) has
> no symbols
> ranlib: for architecture: ppc file: libmysys.a(my_crc32.o) has no
> symbols
> ranlib: for architecture: ppc file: libmysys.a(mf_brkhant.o) has no
> symbols
> ranlib: for architecture: ppc file: libmysys.a(my_lockmem.o) has no
> symbols
> ranlib: for architecture: ppc file: libmysys.a(my_port.o) has no
> symbols
> ranlib: for architecture: ppc file: libmysys.a(my_netware.o) has no
> symbols
> ranlib: for architecture: ppc file: libmysys.a(my_largepage.o) has no
> symbols
> ranlib: for architecture: ppc file: libmysys.a(my_windac.o) has no
> symbols
> ranlib: for architecture: ppc file: libmysys.a(my_access.o) has no
> symbols
> ranlib: for architecture: ppc file: libmysys.a(my_libwrap.o) has no
> symbols
> ranlib: for architecture: ppc file: libmysys.a(thr_mutex.o) has no
> symbols
> ranlib: for architecture: ppc file: libmysys.a(thr_rwlock.o) has no
> symbols
> ranlib: for architecture: i386 file: libmysys.a(my_new.o) has no
> symbols
> ranlib: for architecture: i386 file: libmysys.a(raid.o) has no symbols
> ranlib: warning for library: libmysys.a for architecture: i386 the
> table of contents is empty (no object file members in the library
> define global symbols)
> make[2]: *** [libmysys.a] Error 1
> make[1]: *** [all-recursive] Error 1
> make: *** [all] Error 2
>
> I later tried exporting "-arch i386" (my local native arch) in the
> ARCHFLAGS environment variable but that just got a bit further before
> giving me different errors:
>
> ld: warning in ../myisam/libmyisam.a, file is not of required
> architecture
> ld: warning in ../myisammrg/libmyisammrg.a, file is not of required
> architecture
> ld: warning in ../heap/libheap.a, file is not of required architecture
> ld: warning in ../vio/libvio.a, file is not of required architecture
> ld: warning in ../dbug/libdbug.a, file is not of required architecture
> ld: warning in ../regex/libregex.a, file is not of required
> architecture
> ld: warning in ../strings/libmystrings.a, file is not of required
> architecture
> Undefined symbols:
> "_my_fopen", referenced from:
> tz_load(char const*, st_time_zone_info*, st_mem_root*)in
> mysql_tzinfo_to_sql.o
> "_my_init", referenced from:
> _main in mysql_tzinfo_to_sql.o
> "_my_dirend", referenced from:
> scan_tz_dir(char*) in mysql_tzinfo_to_sql.o
> scan_tz_dir(char*) in mysql_tzinfo_to_sql.o
> "_init_alloc_root", referenced from:
> scan_tz_dir(char*) in mysql_tzinfo_to_sql.o
> _main in mysql_tzinfo_to_sql.o
> "_strmake", referenced from:
> scan_tz_dir(char*) in mysql_tzinfo_to_sql.o
> scan_tz_dir(char*) in mysql_tzinfo_to_sql.o
> _main in mysql_tzinfo_to_sql.o
> "_my_fread", referenced from:
> tz_load(char const*, st_time_zone_info*, st_mem_root*)in
> mysql_tzinfo_to_sql.o
> "_my_progname", referenced from:
> _my_progname$non_lazy_ptr in mysql_tzinfo_to_sql.o
> "_my_dir", referenced from:
> scan_tz_dir(char*) in mysql_tzinfo_to_sql.o
> "_alloc_root", referenced from:
> tz_load(char const*, st_time_zone_info*, st_mem_root*)in
> mysql_tzinfo_to_sql.o
> tz_load(char const*, st_time_zone_info*, st_mem_root*)in
> mysql_tzinfo_to_sql.o
> tz_load(char const*, st_time_zone_info*, st_mem_root*)in
> mysql_tzinfo_to_sql.o
> "_my_fclose", referenced from:
> tz_load(char const*, st_time_zone_info*, st_mem_root*)in
> mysql_tzinfo_to_sql.o
> "_free_root", referenced from:
> scan_tz_dir(char*) in mysql_tzinfo_to_sql.o
> _main in mysql_tzinfo_to_sql.o
> ld: symbol(s) not found
> collect2: ld returned 1 exit status
> make[4]: *** [mysql_tzinfo_to_sql] Error 1
> make[3]: *** [all-recursive] Error 1
> make[2]: *** [all] Error 2
> make[1]: *** [all-recursive] Error 1
> make: *** [all] Error 2
>
> Cheers,
> Wincent

I'd wait a couple weeks or post in a MySQL development forum. Chances
are you'll get a pre-packaged MySQL version that installs on Leopard
then.

If you can't wait, then you'll have to piece together the config scripts
to create MySQL from scatch. The error looks like a library that was
built (libmysys.a) didn't have all X86 object code in it.

Any good at GNU builds?

--
DeeDee, don't press that button! DeeDee! NO! Dee...

On Oct 30, 11:34 pm, Michael Vilain <vil...@NOspamcop.net> wrote:
> Wincent Colaiuta <w...@wincent.com> wrote:
>
> > Anyone had any luck building from source on the newly released Mac OS
> > X Leopard?
>
> I'd wait a couple weeks or post in a MySQL development forum. Chances
> are you'll get a pre-packaged MySQL version that installs on Leopard
> then.

Luckily it's not critical so if I can't get this to work I'll wait
until MySQL makes a binary install available (although it's possible
that their existing Tiger binaries might continue to work on Leopard
anyway).

> If you can't wait, then you'll have to piece together the config scripts
> to create MySQL from scatch. The error looks like a library that was
> built (libmysys.a) didn't have all X86 object code in it.
>
> Any good at GNU builds?

Hehe, only when they work. I'll check out a dev forum like you
suggest.

Cheers,
Wincent