The form is not validating at all? Try this:

if (empty($_POST))

remove the registration check.

When you first come to the form, it should register it. When you submit
the form, it should validate it.

Reynier Perez Mira wrote:

>Nothing ... Monte excuse me if I a little stupid. I change the code again but the form still send without any validate. I check the session file and this is the content:
>-----------------------------------------------
>SmartyValidate|a:1:{s:7:"default";a:4:{s:16:"regi stered_funcs";a:2:{s:8:"criteria";a:0:{}s:9:"trans form";a:0:{}}s:10:"validators";a:2:{i:0;a:8:{s:5:" field";s:6:"uLogin";s:2:"id";s:4:"uLog";s:8:"crite ria";s:8:"notEmpty";s:7:"message";s:37:"El campo usuario no puede estar vacío";s:4:"trim";b:0;s:5:"empty";b:0;s:4:"halt";b :0;s:9:"transform";N;}i:1;a:8:{s:5:"field";s:7:"uP asswd";s:2:"id";s:4:"uPas";s:8:"criteria";s:8:"not Empty";s:7:"message";s:40:"El campo contraseña no puede estar vacío";s:4:"trim";b:0;s:5:"empty";b:0;s:4:"halt";b :0;s:9:"transform";N;}}s:8:"is_error";b:0;s:7:"is_ init";b:0;}}
>-----------------------------------------------
>So if Smarty working fine I believe, what's really wrong here? I can find it.
>
>Regards
>ReynierPM
>4to. año Ing. Informática
>Usuario registrado de Linux: #310201
>************************************************* ************************
>El programador superhéroe aprende de compartir sus conocimientos.
>Es el referente de sus compañeros. Todo el mundo va a preguntarle
>y él, secretamente, lo fomenta porque es así como adquiere su legendaria
>sabiduría: escuchando ayudando a los demás...
>
>-----Mensaje original-----
>De: Monte Ohrt [mailto:monte@ohrt.com]
>Enviado el: Monday, January 23, 2006 11:45 am
>Para: Reynier Perez Mira
>CC: smarty-general@lists.php.net
>Asunto: Re: [SMARTY] SmartyValidate 2.6 and Smarty 2.6.12 doesn't work ...
>
>The form needs reset each time it is "new", so maybe use empty($_POST)
>along with the register test:
>
>if(!SmartyValidate::is_registered_form() || empty($_POST)) {
>
>
>
>Reynier Perez Mira wrote:
>
>
>
>>Well, I follow your instructions and change the bad code. The code now is this:
>>--------------------------------
>>if(!SmartyValidate::is_registered_form('default' )) {
>> SmartyValidate::connect($tpl, true);
>> SmartyValidate::register_validator('uLog','uLogin' ,'notEmpty');
>> SmartyValidate::register_validator('uPas','uPasswd ','notEmpty');
>> $tpl->display('a_home.tpl');
>> } else {
>> SmartyValidate::connect($tpl);
>> if(SmartyValidate::is_valid($_POST)) {
>> SmartyValidate::disconnect();
>> $tpl->display('success.tpl');
>> } else {
>> $tpl->assign($_POST);
>> $tpl->display('a_home.tpl');
>> }
>> }
>>--------------------------------
>>But when I submit the form and leave fields empty, nothing is validate!!! So ... when I click the back button in my FF browser then the messages: " El campo usuario no puede estar vacío" and " El campo contraseña no puede estar vacío" appears. Why this?
>>
>>
>>Regards
>>ReynierPM
>>4to. año Ing. Informática
>>Usuario registrado de Linux: #310201
>>************************************************ *************************
>>El programador superhéroe aprende de compartir sus conocimientos.
>>Es el referente de sus compañeros. Todo el mundo va a preguntarle
>>y él, secretamente, lo fomenta porque es así como adquiere su legendaria
>>sabiduría: escuchando ayudando a los demás...
>>
>>-----Mensaje original-----
>>De: Monte Ohrt [mailto:monte@ohrt.com]
>>Enviado el: Monday, January 23, 2006 11:34 am
>>Para: Reynier Perez Mira
>>CC: smarty-general@lists.php.net
>>Asunto: Re: [SMARTY] SmartyValidate 2.6 and Smarty 2.6.12 doesn't work ...
>>
>>that is the name of the form. if you didn't name it when you registered,
>>then 'default' is correct. You can also leave it empty:
>>
>>is_registered_form()
>>
>>Reynier Perez Mira wrote:
>>
>>
>>
>>
>>
>>>Hi Monte:
>>>Understand every, but I have one doubt: what's 'default'? a name for a form or a id or something ...
>>>
>>>Best,
>>>ReynierPM
>>>4to. año Ing. Informática
>>>Usuario registrado de Linux: #310201
>>>*********************************************** **************************
>>>El programador superhéroe aprende de compartir sus conocimientos.
>>>Es el referente de sus compañeros. Todo el mundo va a preguntarle
>>>y él, secretamente, lo fomenta porque es así como adquiere su legendaria
>>>sabiduría: escuchando ayudando a los demás...
>>>
>>>-----Mensaje original-----
>>>De: Monte Ohrt [mailto:monte@ohrt.com]
>>>Enviado el: Monday, January 23, 2006 10:51 am
>>>Para: Reynier Perez Mira
>>>CC: smarty-general@lists.php.net
>>>Asunto: Re: [SMARTY] SmartyValidate 2.6 and Smarty 2.6.12 doesn't work ...
>>>
>>>Monte Ohrt wrote:
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>>Your code is almost right, just change:
>>>>
>>>>if(SmartyValidate::is_valid($_POST)) {
>>>>
>>>>to:
>>>>
>>>>if(!empty($_POST)) {
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>oops, make that:
>>>
>>>if(empty($_POST)) {
>>>
>>>I'll note that testing if $_POST is empty isn't always an accurate
>>>approach in every situation, another approach is to test if the form is
>>>registered:
>>>
>>>if (!SmartyValidate::is_registered_form('default')) {
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>>Reynier Perez Mira wrote:
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>>Hi:
>>>>>Well, after all and a little latest (¿Jan 23?) "Happy New Year".
>>>>>I try to construct a web application in these days. I decide use
>>>>>Smarty as my template engine because it's perfectly and powerful. I
>>>>>have some form in which user can add news, sign guestbook and some
>>>>>other stuff. These form need to be validate after send it to
>>>>>database. So ... searching in Smarty forum I found SmartyValidate class.
>>>>>I read the doc form website and setup this in my application:
>>>>>
>>>>>index.php
>>>>>------------------------------------------------------------------
>>>>>/* Start new session each time */
>>>>>session_start();
>>>>>
>>>>>setlocale(LC_ALL, 'esp_ESP');
>>>>>
>>>>>include_once('../config.inc.php');
>>>>>require_once('../api/smarty/Smarty.class.php');
>>>>>require_once('../api/smarty/SmartyValidate.class.php');
>>>>>include_once('../api/dbase/adodb-exceptions.inc.php');
>>>>>include_once('../api/dbase/adodb.inc.php');
>>>>>
>>>>>/* Setup Smarty Class */
>>>>>$tpl = new Smarty();
>>>>>$tpl->template_dir = '../' . cnf_TemplateDir;
>>>>>$tpl->compile_dir = '../' . cnf_TemplateDir . cnf_CompileDir;
>>>>>$tpl->config_dir = '../' . cnf_TemplateDir . cnf_ConfigDir;
>>>>>$tpl->cache_dir = '../' . cnf_TemplateDir . cnf_CacheDir;
>>>>>$tpl->compile_check = cnf_CompileCheck;
>>>>>$tpl->debugging = false;
>>>>>
>>>>>if(SmartyValidate::is_valid($_POST)) {
>>>>>SmartyValidate::connect($tpl, true);
>>>>>SmartyValidate::register_validator('uLog','uL ogin','notEmpty');
>>>>>SmartyValidate::register_validator('uPas','uP asswd','notEmpty');
>>>>>$tpl->display('a_home.tpl');
>>>>>} else {
>>>>>SmartyValidate::connect($tpl);
>>>>> if(SmartyValidate::is_valid($_POST)) {
>>>>> SmartyValidate::disconnect();
>>>>> $tpl->display('success.tpl');
>>>>> } else {
>>>>> $tpl->assign($_POST);
>>>>> $tpl->display('a_home.tpl');
>>>>> }
>>>>>}
>>>>>------------------------------------------------------------------
>>>>>
>>>>>a_home.tpl
>>>>>------------------------------------------------------------------
>>>>><form name="frm_aLogin" id="frm_aLogin" method="post"
>>>>>action="index.php?opt=chkuLogin" enctype="multipart/form-data">
>>>>><fieldset>
>>>>><legend>Login de Administrador</legend> <table width="100%"
>>>>>cellpadding="0" cellspacing="0" border="0">
>>>>> <tr>
>>>>> <td width="25%" class="derecha">Usuario:</td>
>>>>> <td width="75%">
>>>>> <input type="text" name="uLogin" id="uLogin" size="35"
>>>>>maxlength="35" />{validate id="uLog" message="El campo usuario no
>>>>>puede estar vacío"}
>>>>> </td>
>>>>> </tr>
>>>>> <tr>
>>>>> <td class="derecha">Contraseña:</td>
>>>>> <td><input type="password" name="uPasswd" id="uPasswd" size="35"
>>>>>maxlength="250" />{validate id="uPas" message="El campo contraseña no
>>>>>puede estar vacío"}
>>>>> </td>
>>>>> </tr>
>>>>> <tr>
>>>>> <td class="centro" colspan="2"><input type="submit"
>>>>>name="btn_Login" id="btn_Login" value="Entrar ..." /></td>
>>>>> </tr>
>>>>> </table>
>>>>> </fieldset>
>>>>></form>
>>>>>------------------------------------------------------------------
>>>>>
>>>>>As you can see, nothing is strange here in this code. Well when I
>>>>>call the file from my FF browser, ex: http://localhost/admincp/index.php
>>>>>This warnings appear:
>>>>>------------------------------------------------------------------
>>>>>Warning: Smarty error: validate: validator id 'uLog' is not
>>>>>registered. in D:\WebServer\WWW\simpro\api\smarty\Smarty.class.ph p on
>>>>>line 1095
>>>>>
>>>>>Warning: Smarty error: validate: validator id 'uPas' is not
>>>>>registered. in D:\WebServer\WWW\simpro\api\smarty\Smarty.class.ph p on
>>>>>line 1095
>>>>>------------------------------------------------------------------
>>>>>
>>>>>What's wrong in my code?
>>>>>I work with PHP 5.1.2, have this something to see?
>>>>>
>>>>>Best, ReynierPM
>>>>>4to. año Ing. Informática
>>>>>Usuario registrado de Linux: #310201
>>>>>********************************************* ****************************
>>>>>
>>>>>El programador superhéroe aprende de compartir sus conocimientos. Es
>>>>>el referente de sus compañeros. Todo el mundo va a preguntarle y él,
>>>>>secretamente, lo fomenta porque es así como adquiere su legendaria
>>>>>sabiduría: escuchando ayudando a los demás...
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>
>>>
>>>
>>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>
>
>
>
>
>
>
>
>!DSPAM:43d51809286061294912330!
>
>
>
>

Nothing ... Monte excuse me if I a little stupid. I change the code again but the form still send without any validate. I check the session file and this is the content:
-----------------------------------------------
SmartyValidate|a:1:{s:7:"default";a:4:{s:16:"regis tered_funcs";a:2:{s:8:"criteria";a:0:{}s:9:"transf orm";a:0:{}}s:10:"validators";a:2:{i:0;a:8:{s:5:"f ield";s:6:"uLogin";s:2:"id";s:4:"uLog";s:8:"criter ia";s:8:"notEmpty";s:7:"message";s:37:"El campo usuario no puede estar vacío";s:4:"trim";b:0;s:5:"empty";b:0;s:4:"halt";b :0;s:9:"transform";N;}i:1;a:8:{s:5:"field";s:7:"uP asswd";s:2:"id";s:4:"uPas";s:8:"criteria";s:8:"not Empty";s:7:"message";s:40:"El campo contraseña no puede estar vacío";s:4:"trim";b:0;s:5:"empty";b:0;s:4:"halt";b :0;s:9:"transform";N;}}s:8:"is_error";b:0;s:7:"is_ init";b:0;}}
-----------------------------------------------
So if Smarty working fine I believe, what's really wrong here? I can find it.

Regards
ReynierPM
4to. año Ing. Informática
Usuario registrado de Linux: #310201
************************************************** ***********************
El programador superhéroe aprende de compartir sus conocimientos.
Es el referente de sus compañeros. Todo el mundo va a preguntarle
y él, secretamente, lo fomenta porque es así como adquiere su legendaria
sabiduría: escuchando ayudando a los demás...

-----Mensaje original-----
De: Monte Ohrt [mailto:monte@ohrt.com]
Enviado el: Monday, January 23, 2006 11:45 am
Para: Reynier Perez Mira
CC: smarty-general@lists.php.net
Asunto: Re: [SMARTY] SmartyValidate 2.6 and Smarty 2.6.12 doesn't work ....

The form needs reset each time it is "new", so maybe use empty($_POST)
along with the register test:

if(!SmartyValidate::is_registered_form() || empty($_POST)) {



Reynier Perez Mira wrote:

>Well, I follow your instructions and change the bad code. The code now is this:
>--------------------------------
>if(!SmartyValidate::is_registered_form('default') ) {
> SmartyValidate::connect($tpl, true);
> SmartyValidate::register_validator('uLog','uLogin' ,'notEmpty');
> SmartyValidate::register_validator('uPas','uPasswd ','notEmpty');
> $tpl->display('a_home.tpl');
> } else {
> SmartyValidate::connect($tpl);
> if(SmartyValidate::is_valid($_POST)) {
> SmartyValidate::disconnect();
> $tpl->display('success.tpl');
> } else {
> $tpl->assign($_POST);
> $tpl->display('a_home.tpl');
> }
> }
>--------------------------------
>But when I submit the form and leave fields empty, nothing is validate!!! So ... when I click the back button in my FF browser then the messages: " El campo usuario no puede estar vacío" and " El campo contraseña no puede estar vacío" appears. Why this?
>
>
>Regards
>ReynierPM
>4to. año Ing. Informática
>Usuario registrado de Linux: #310201
>************************************************* ************************
>El programador superhéroe aprende de compartir sus conocimientos.
>Es el referente de sus compañeros. Todo el mundo va a preguntarle
>y él, secretamente, lo fomenta porque es así como adquiere su legendaria
>sabiduría: escuchando ayudando a los demás...
>
>-----Mensaje original-----
>De: Monte Ohrt [mailto:monte@ohrt.com]
>Enviado el: Monday, January 23, 2006 11:34 am
>Para: Reynier Perez Mira
>CC: smarty-general@lists.php.net
>Asunto: Re: [SMARTY] SmartyValidate 2.6 and Smarty 2.6.12 doesn't work ....
>
>that is the name of the form. if you didn't name it when you registered,
>then 'default' is correct. You can also leave it empty:
>
>is_registered_form()
>
>Reynier Perez Mira wrote:
>
>
>
>>Hi Monte:
>>Understand every, but I have one doubt: what's 'default'? a name for a form or a id or something ...
>>
>>Best,
>>ReynierPM
>>4to. año Ing. Informática
>>Usuario registrado de Linux: #310201
>>************************************************ *************************
>>El programador superhéroe aprende de compartir sus conocimientos.
>>Es el referente de sus compañeros. Todo el mundo va a preguntarle
>>y él, secretamente, lo fomenta porque es así como adquiere su legendaria
>>sabiduría: escuchando ayudando a los demás...
>>
>>-----Mensaje original-----
>>De: Monte Ohrt [mailto:monte@ohrt.com]
>>Enviado el: Monday, January 23, 2006 10:51 am
>>Para: Reynier Perez Mira
>>CC: smarty-general@lists.php.net
>>Asunto: Re: [SMARTY] SmartyValidate 2.6 and Smarty 2.6.12 doesn't work ....
>>
>>Monte Ohrt wrote:
>>
>>
>>
>>
>>
>>>Your code is almost right, just change:
>>>
>>>if(SmartyValidate::is_valid($_POST)) {
>>>
>>>to:
>>>
>>>if(!empty($_POST)) {
>>>
>>>
>>>
>>>
>>>
>>>
>>oops, make that:
>>
>>if(empty($_POST)) {
>>
>>I'll note that testing if $_POST is empty isn't always an accurate
>>approach in every situation, another approach is to test if the form is
>>registered:
>>
>>if (!SmartyValidate::is_registered_form('default')) {
>>
>>
>>
>>
>>
>>>Reynier Perez Mira wrote:
>>>
>>>
>>>
>>>
>>>
>>>>Hi:
>>>>Well, after all and a little latest (¿Jan 23?) "Happy New Year".
>>>>I try to construct a web application in these days. I decide use
>>>>Smarty as my template engine because it's perfectly and powerful. I
>>>>have some form in which user can add news, sign guestbook and some
>>>>other stuff. These form need to be validate after send it to
>>>>database. So ... searching in Smarty forum I found SmartyValidate class.
>>>>I read the doc form website and setup this in my application:
>>>>
>>>>index.php
>>>>------------------------------------------------------------------
>>>>/* Start new session each time */
>>>>session_start();
>>>>
>>>>setlocale(LC_ALL, 'esp_ESP');
>>>>
>>>>include_once('../config.inc.php');
>>>>require_once('../api/smarty/Smarty.class.php');
>>>>require_once('../api/smarty/SmartyValidate.class.php');
>>>>include_once('../api/dbase/adodb-exceptions.inc.php');
>>>>include_once('../api/dbase/adodb.inc.php');
>>>>
>>>>/* Setup Smarty Class */
>>>>$tpl = new Smarty();
>>>>$tpl->template_dir = '../' . cnf_TemplateDir;
>>>>$tpl->compile_dir = '../' . cnf_TemplateDir . cnf_CompileDir;
>>>>$tpl->config_dir = '../' . cnf_TemplateDir . cnf_ConfigDir;
>>>>$tpl->cache_dir = '../' . cnf_TemplateDir . cnf_CacheDir;
>>>>$tpl->compile_check = cnf_CompileCheck;
>>>>$tpl->debugging = false;
>>>>
>>>>if(SmartyValidate::is_valid($_POST)) {
>>>>SmartyValidate::connect($tpl, true);
>>>>SmartyValidate::register_validator('uLog','uLo gin','notEmpty');
>>>>SmartyValidate::register_validator('uPas','uPa sswd','notEmpty');
>>>>$tpl->display('a_home.tpl');
>>>>} else {
>>>>SmartyValidate::connect($tpl);
>>>> if(SmartyValidate::is_valid($_POST)) {
>>>> SmartyValidate::disconnect();
>>>> $tpl->display('success.tpl');
>>>> } else {
>>>> $tpl->assign($_POST);
>>>> $tpl->display('a_home.tpl');
>>>> }
>>>>}
>>>>------------------------------------------------------------------
>>>>
>>>>a_home.tpl
>>>>------------------------------------------------------------------
>>>><form name="frm_aLogin" id="frm_aLogin" method="post"
>>>>action="index.php?opt=chkuLogin" enctype="multipart/form-data">
>>>><fieldset>
>>>> <legend>Login de Administrador</legend> <table width="100%"
>>>>cellpadding="0" cellspacing="0" border="0">
>>>> <tr>
>>>> <td width="25%" class="derecha">Usuario:</td>
>>>> <td width="75%">
>>>> <input type="text" name="uLogin" id="uLogin" size="35"
>>>>maxlength="35" />{validate id="uLog" message="El campo usuario no
>>>>puede estar vacío"}
>>>> </td>
>>>> </tr>
>>>> <tr>
>>>> <td class="derecha">Contraseña:</td>
>>>> <td><input type="password" name="uPasswd" id="uPasswd" size="35"
>>>>maxlength="250" />{validate id="uPas" message="El campo contraseña no
>>>>puede estar vacío"}
>>>> </td>
>>>> </tr>
>>>> <tr>
>>>> <td class="centro" colspan="2"><input type="submit"
>>>>name="btn_Login" id="btn_Login" value="Entrar ..." /></td>
>>>> </tr>
>>>> </table>
>>>> </fieldset>
>>>> </form>
>>>>------------------------------------------------------------------
>>>>
>>>>As you can see, nothing is strange here in this code. Well when I
>>>>call the file from my FF browser, ex: http://localhost/admincp/index.php
>>>>This warnings appear:
>>>>------------------------------------------------------------------
>>>>Warning: Smarty error: validate: validator id 'uLog' is not
>>>>registered. in D:\WebServer\WWW\simpro\api\smarty\Smarty.class.ph p on
>>>>line 1095
>>>>
>>>>Warning: Smarty error: validate: validator id 'uPas' is not
>>>>registered. in D:\WebServer\WWW\simpro\api\smarty\Smarty.class.ph p on
>>>>line 1095
>>>>------------------------------------------------------------------
>>>>
>>>>What's wrong in my code?
>>>>I work with PHP 5.1.2, have this something to see?
>>>>
>>>>Best, ReynierPM
>>>>4to. año Ing. Informática
>>>>Usuario registrado de Linux: #310201
>>>>********************************************** ***************************
>>>>
>>>>El programador superhéroe aprende de compartir sus conocimientos. Es
>>>>el referente de sus compañeros. Todo el mundo va a preguntarle y él,
>>>>secretamente, lo fomenta porque es así como adquiere su legendaria
>>>>sabiduría: escuchando ayudando a los demás...
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>
>>
>>
>>
>
>
>
>
>
>
>
>
>!DSPAM:43d5151d125027126579485!
>
>
>
>