that is the name of the form. if you didn't name it when you registered,
then 'default' is correct. You can also leave it empty:

is_registered_form()

Reynier Perez Mira wrote:

>Hi Monte:
>Understand every, but I have one doubt: what's 'default'? a name for a form or a id or something ...
>
>Best,
>ReynierPM
>4to. año Ing. Informática
>Usuario registrado de Linux: #310201
>************************************************* ************************
>El programador superhéroe aprende de compartir sus conocimientos.
>Es el referente de sus compañeros. Todo el mundo va a preguntarle
>y él, secretamente, lo fomenta porque es así como adquiere su legendaria
>sabiduría: escuchando ayudando a los demás...
>
>-----Mensaje original-----
>De: Monte Ohrt [mailto:monte@ohrt.com]
>Enviado el: Monday, January 23, 2006 10:51 am
>Para: Reynier Perez Mira
>CC: smarty-general@lists.php.net
>Asunto: Re: [SMARTY] SmartyValidate 2.6 and Smarty 2.6.12 doesn't work ...
>
>Monte Ohrt wrote:
>
>
>
>>Your code is almost right, just change:
>>
>>if(SmartyValidate::is_valid($_POST)) {
>>
>>to:
>>
>>if(!empty($_POST)) {
>>
>>
>>
>>
>
>oops, make that:
>
> if(empty($_POST)) {
>
>I'll note that testing if $_POST is empty isn't always an accurate
>approach in every situation, another approach is to test if the form is
>registered:
>
>if (!SmartyValidate::is_registered_form('default')) {
>
>
>
>>
>>
>>Reynier Perez Mira wrote:
>>
>>
>>
>>>Hi:
>>>Well, after all and a little latest (¿Jan 23?) "Happy New Year".
>>>I try to construct a web application in these days. I decide use
>>>Smarty as my template engine because it's perfectly and powerful. I
>>>have some form in which user can add news, sign guestbook and some
>>>other stuff. These form need to be validate after send it to
>>>database. So ... searching in Smarty forum I found SmartyValidate class.
>>>I read the doc form website and setup this in my application:
>>>
>>>index.php
>>>------------------------------------------------------------------
>>>/* Start new session each time */
>>>session_start();
>>>
>>>setlocale(LC_ALL, 'esp_ESP');
>>>
>>>include_once('../config.inc.php');
>>>require_once('../api/smarty/Smarty.class.php');
>>>require_once('../api/smarty/SmartyValidate.class.php');
>>>include_once('../api/dbase/adodb-exceptions.inc.php');
>>>include_once('../api/dbase/adodb.inc.php');
>>>
>>>/* Setup Smarty Class */
>>>$tpl = new Smarty();
>>>$tpl->template_dir = '../' . cnf_TemplateDir;
>>>$tpl->compile_dir = '../' . cnf_TemplateDir . cnf_CompileDir;
>>>$tpl->config_dir = '../' . cnf_TemplateDir . cnf_ConfigDir;
>>>$tpl->cache_dir = '../' . cnf_TemplateDir . cnf_CacheDir;
>>>$tpl->compile_check = cnf_CompileCheck;
>>>$tpl->debugging = false;
>>>
>>>if(SmartyValidate::is_valid($_POST)) {
>>> SmartyValidate::connect($tpl, true);
>>> SmartyValidate::register_validator('uLog','uLogin' ,'notEmpty');
>>> SmartyValidate::register_validator('uPas','uPasswd ','notEmpty');
>>> $tpl->display('a_home.tpl');
>>>} else {
>>> SmartyValidate::connect($tpl);
>>> if(SmartyValidate::is_valid($_POST)) {
>>> SmartyValidate::disconnect();
>>> $tpl->display('success.tpl');
>>> } else {
>>> $tpl->assign($_POST);
>>> $tpl->display('a_home.tpl');
>>> }
>>>}
>>>------------------------------------------------------------------
>>>
>>>a_home.tpl
>>>------------------------------------------------------------------
>>><form name="frm_aLogin" id="frm_aLogin" method="post"
>>>action="index.php?opt=chkuLogin" enctype="multipart/form-data">
>>><fieldset>
>>> <legend>Login de Administrador</legend> <table width="100%"
>>>cellpadding="0" cellspacing="0" border="0">
>>> <tr>
>>> <td width="25%" class="derecha">Usuario:</td>
>>> <td width="75%">
>>> <input type="text" name="uLogin" id="uLogin" size="35"
>>>maxlength="35" />{validate id="uLog" message="El campo usuario no
>>>puede estar vacío"}
>>> </td>
>>> </tr>
>>> <tr>
>>> <td class="derecha">Contraseña:</td>
>>> <td><input type="password" name="uPasswd" id="uPasswd" size="35"
>>>maxlength="250" />{validate id="uPas" message="El campo contraseña no
>>>puede estar vacío"}
>>> </td>
>>> </tr>
>>> <tr>
>>> <td class="centro" colspan="2"><input type="submit"
>>>name="btn_Login" id="btn_Login" value="Entrar ..." /></td>
>>> </tr>
>>> </table>
>>> </fieldset>
>>> </form>
>>>------------------------------------------------------------------
>>>
>>>As you can see, nothing is strange here in this code. Well when I
>>>call the file from my FF browser, ex: http://localhost/admincp/index.php
>>>This warnings appear:
>>>------------------------------------------------------------------
>>>Warning: Smarty error: validate: validator id 'uLog' is not
>>>registered. in D:\WebServer\WWW\simpro\api\smarty\Smarty.class.ph p on
>>>line 1095
>>>
>>>Warning: Smarty error: validate: validator id 'uPas' is not
>>>registered. in D:\WebServer\WWW\simpro\api\smarty\Smarty.class.ph p on
>>>line 1095
>>>------------------------------------------------------------------
>>>
>>>What's wrong in my code?
>>>I work with PHP 5.1.2, have this something to see?
>>>
>>>Best, ReynierPM
>>>4to. año Ing. Informática
>>>Usuario registrado de Linux: #310201
>>>*********************************************** **************************
>>>
>>>El programador superhéroe aprende de compartir sus conocimientos. Es
>>>el referente de sus compañeros. Todo el mundo va a preguntarle y él,
>>>secretamente, lo fomenta porque es así como adquiere su legendaria
>>>sabiduría: escuchando ayudando a los demás...
>>>
>>>
>>>
>>>
>>>
>
>
>

Hi Monte:
Understand every, but I have one doubt: what's 'default'? a name for a form or a id or something ...

Best,
ReynierPM
4to. año Ing. Informática
Usuario registrado de Linux: #310201
************************************************** ***********************
El programador superhéroe aprende de compartir sus conocimientos.
Es el referente de sus compañeros. Todo el mundo va a preguntarle
y él, secretamente, lo fomenta porque es así como adquiere su legendaria
sabiduría: escuchando ayudando a los demás...

-----Mensaje original-----
De: Monte Ohrt [mailto:monte@ohrt.com]
Enviado el: Monday, January 23, 2006 10:51 am
Para: Reynier Perez Mira
CC: smarty-general@lists.php.net
Asunto: Re: [SMARTY] SmartyValidate 2.6 and Smarty 2.6.12 doesn't work ....

Monte Ohrt wrote:

> Your code is almost right, just change:
>
> if(SmartyValidate::is_valid($_POST)) {
>
> to:
>
> if(!empty($_POST)) {
>
>

oops, make that:

if(empty($_POST)) {

I'll note that testing if $_POST is empty isn't always an accurate
approach in every situation, another approach is to test if the form is
registered:

if (!SmartyValidate::is_registered_form('default')) {

>
>
>
>
> Reynier Perez Mira wrote:
>
>> Hi:
>> Well, after all and a little latest (¿Jan 23?) "Happy New Year".
>> I try to construct a web application in these days. I decide use
>> Smarty as my template engine because it's perfectly and powerful. I
>> have some form in which user can add news, sign guestbook and some
>> other stuff. These form need to be validate after send it to
>> database. So ... searching in Smarty forum I found SmartyValidate class.
>> I read the doc form website and setup this in my application:
>>
>> index.php
>> ------------------------------------------------------------------
>> /* Start new session each time */
>> session_start();
>>
>> setlocale(LC_ALL, 'esp_ESP');
>>
>> include_once('../config.inc.php');
>> require_once('../api/smarty/Smarty.class.php');
>> require_once('../api/smarty/SmartyValidate.class.php');
>> include_once('../api/dbase/adodb-exceptions.inc.php');
>> include_once('../api/dbase/adodb.inc.php');
>>
>> /* Setup Smarty Class */
>> $tpl = new Smarty();
>> $tpl->template_dir = '../' . cnf_TemplateDir;
>> $tpl->compile_dir = '../' . cnf_TemplateDir . cnf_CompileDir;
>> $tpl->config_dir = '../' . cnf_TemplateDir . cnf_ConfigDir;
>> $tpl->cache_dir = '../' . cnf_TemplateDir . cnf_CacheDir;
>> $tpl->compile_check = cnf_CompileCheck;
>> $tpl->debugging = false;
>>
>> if(SmartyValidate::is_valid($_POST)) {
>> SmartyValidate::connect($tpl, true);
>> SmartyValidate::register_validator('uLog','uLogin' ,'notEmpty');
>> SmartyValidate::register_validator('uPas','uPasswd ','notEmpty');
>> $tpl->display('a_home.tpl');
>> } else {
>> SmartyValidate::connect($tpl);
>> if(SmartyValidate::is_valid($_POST)) {
>> SmartyValidate::disconnect();
>> $tpl->display('success.tpl');
>> } else {
>> $tpl->assign($_POST);
>> $tpl->display('a_home.tpl');
>> }
>> }
>> ------------------------------------------------------------------
>>
>> a_home.tpl
>> ------------------------------------------------------------------
>> <form name="frm_aLogin" id="frm_aLogin" method="post"
>> action="index.php?opt=chkuLogin" enctype="multipart/form-data">
>> <fieldset>
>> <legend>Login de Administrador</legend> <table width="100%"
>> cellpadding="0" cellspacing="0" border="0">
>> <tr>
>> <td width="25%" class="derecha">Usuario:</td>
>> <td width="75%">
>> <input type="text" name="uLogin" id="uLogin" size="35"
>> maxlength="35" />{validate id="uLog" message="El campo usuario no
>> puede estar vacío"}
>> </td>
>> </tr>
>> <tr>
>> <td class="derecha">Contraseña:</td>
>> <td><input type="password" name="uPasswd" id="uPasswd" size="35"
>> maxlength="250" />{validate id="uPas" message="El campo contraseña no
>> puede estar vacío"}
>> </td>
>> </tr>
>> <tr>
>> <td class="centro" colspan="2"><input type="submit"
>> name="btn_Login" id="btn_Login" value="Entrar ..." /></td>
>> </tr>
>> </table>
>> </fieldset>
>> </form>
>> ------------------------------------------------------------------
>>
>> As you can see, nothing is strange here in this code. Well when I
>> call the file from my FF browser, ex: http://localhost/admincp/index.php
>> This warnings appear:
>> ------------------------------------------------------------------
>> Warning: Smarty error: validate: validator id 'uLog' is not
>> registered. in D:\WebServer\WWW\simpro\api\smarty\Smarty.class.ph p on
>> line 1095
>>
>> Warning: Smarty error: validate: validator id 'uPas' is not
>> registered. in D:\WebServer\WWW\simpro\api\smarty\Smarty.class.ph p on
>> line 1095
>> ------------------------------------------------------------------
>>
>> What's wrong in my code?
>> I work with PHP 5.1.2, have this something to see?
>>
>> Best, ReynierPM
>> 4to. año Ing. Informática
>> Usuario registrado de Linux: #310201
>> ************************************************** ***********************
>>
>> El programador superhéroe aprende de compartir sus conocimientos. Es
>> el referente de sus compañeros. Todo el mundo va a preguntarle y él,
>> secretamente, lo fomenta porque es así como adquiere su legendaria
>> sabiduría: escuchando ayudando a los demás...
>>
>>
>>
>