On 6/1/07, Georg Heinrich <georg.heinrich@gh-blue.de> wrote:
> Hello,
>
> I don't get wlan with wpa working on my powerbook g4 with etch.
>
> This is the lspci output:
>
> 0001:10:12:0 Network controller: Broadcom Corporation BCM4306 802.11b/g
> Wireless LAN Controller (rev 03)
>
> This is my /etc/network/interfaces file:
>
> auto eth2
> iface eth2 inet manual
> wpa-sriver wext

wpa-driver ?? It's a "d" ?

Best regards,
Bin

> wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf
>
> iface office inet dhcp
>
> iface anywhere inet dhcp
>
> This is my /etc/wpa_supplicant/wpa_supplicant.conf:
>
> ctrl_interface=/var/run/wpa_supplicant
>
> network={
> id_str="office"
> ssid="gh-office-wlan" # = airport network name
> psk="64-byte hex-string obtained with wpa_passphrase"
> }
>
> network={
> id_str="anywhere"
> ssid=""
> key_mgmt=NONE
> }
>
> The network-admin says "wireless network eth2 active" but under
> properties, the network is not selected. It appears in the pop-up menu
> though and I can select it, but afterwards ping returns "network unreachable".
> There is no wpa_action.log file in /var/log.
>
> Any ideas?
> Thanks in advance,
>
> G. Heinrich
>
>
>
> --
> To UNSUBSCRIBE, email to debian-powerpc-REQUEST@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
>
>


--
To UNSUBSCRIBE, email to debian-laptop-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org