PHWinfo - Afficher un message

16/05/2008, 14h26

Hello Phil,

Step-by-Step_Guide_for_Windows_Deployment_Services_in_Wind ows_Server_2008.doc:
https://www.microsoft.com/downloads/...displaylang=en

FAQ go to CONFIGURATION:
http://technet2.microsoft.com/window....mspx?mfr=true

You can run 2008 WDS and 2003 WDS together in one network:
http://technet2.microsoft.com/window....mspx?mfr=true

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.
** Please do NOT email, only reply to Newsgroups
** us YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

> I run an engineering Development Lab with around 130 Servers in it
> ruuning mostly Server 2003 flavors but also some Windows 2000 and we
> are just adding Server 2008 to the mix as well. We have mostly
> Physical servers today and have just recently begun making use of
> Virtual Server 2005 R2 and Virtual Machine Manager. We plan to
> consolidate around 35 servers in the coming 2 months While expanding
> our server farm capacity by about the same number on virtual hardware.
> To do a lot of this we use RIS, actually today we use Windows
> Deployment Services (Legacy mode) to roll out our Server 2003
> environments and support software.
>
> I'm in the process of developing plans to integrate and migrate more
> Server 2008 machines. Part of our desire is to upgrade deployment
> capabilities onto Server 2008 machines but we seem to have hit a
> roadblock or at least a large pot hole. It appeard that the Windows
> Deployment role in Server 2008 only supports Server 2008 and Vista
> deployments, legacy Windows 2003 is not included. I understand the
> difference in the deployment models between the two and need to find
> out if the Server 2003 deployment services can support mixed mode
> deployment or if the lastest Windows Automated Install Kit can do it.
> I would like to consolidate our deployment services on to as few
> machines as can handle the load as possible and it simply does not
> make sense for us to migrate out deployment system up to server 2008
> early if we are hamstrung by only partial support for our server
> deployments.
>
> I've been looking for discussions and whitepapers on mixed mode
> deployment support but found only docs that one or the other mode.
> Does anyone have any advice, resources or links to docs etc on the
> subject?
>
> Anything that gets the ball rolling would be ful.
>
> Thanks,
> Phil
> CheckFree

16/05/2008, 14h26	#2
Meinolf Weber Messages: n/a Hébergeur:	Re: Windows Deployment with Server 2008 Hello Phil, Step-by-Step_Guide_for_Windows_Deployment_Services_in_Wind ows_Server_2008.doc: https://www.microsoft.com/downloads/...displaylang=en FAQ go to CONFIGURATION: http://technet2.microsoft.com/window....mspx?mfr=true You can run 2008 WDS and 2003 WDS together in one network: http://technet2.microsoft.com/window....mspx?mfr=true Best regards Meinolf Weber Disclaimer: This posting is provided "AS IS" with no warranties, and confers no rights. Please do NOT email, only reply to Newsgroups us YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm > I run an engineering Development Lab with around 130 Servers in it > ruuning mostly Server 2003 flavors but also some Windows 2000 and we > are just adding Server 2008 to the mix as well. We have mostly > Physical servers today and have just recently begun making use of > Virtual Server 2005 R2 and Virtual Machine Manager. We plan to > consolidate around 35 servers in the coming 2 months While expanding > our server farm capacity by about the same number on virtual hardware. > To do a lot of this we use RIS, actually today we use Windows > Deployment Services (Legacy mode) to roll out our Server 2003 > environments and support software. > > I'm in the process of developing plans to integrate and migrate more > Server 2008 machines. Part of our desire is to upgrade deployment > capabilities onto Server 2008 machines but we seem to have hit a > roadblock or at least a large pot hole. It appeard that the Windows > Deployment role in Server 2008 only supports Server 2008 and Vista > deployments, legacy Windows 2003 is not included. I understand the > difference in the deployment models between the two and need to find > out if the Server 2003 deployment services can support mixed mode > deployment or if the lastest Windows Automated Install Kit can do it. > I would like to consolidate our deployment services on to as few > machines as can handle the load as possible and it simply does not > make sense for us to migrate out deployment system up to server 2008 > early if we are hamstrung by only partial support for our server > deployments. > > I've been looking for discussions and whitepapers on mixed mode > deployment support but found only docs that one or the other mode. > Does anyone have any advice, resources or links to docs etc on the > subject? > > Anything that gets the ball rolling would be ful. > > Thanks, > Phil > CheckFree