PHWinfo - Afficher un message - Error 0xe0000100 running Windows Server 2008 Setup from Windows 2000

08/05/2008, 21h54

I'm trying to do a clean install (not an upgrade install). Launching
Setup from the existing O/S is just a convenience, since I don't have
the 2008 DVD here.

I found some more information in a log file. Perhaps Setup is
referencing an unknown symbol in KERNEL32.DLL.

-BGU

D:\$WINDOWS.~BT\Sources\Panther>type setuperr.log
2008-05-08 13:49:46, FatalError EulaText != 0 &&
EulaText[0]
2008-05-08 13:49:46, FatalError [0x090001] PANTHR Unhandled exception
(code 0xE0000100: <unknown>) occurred at 0x7C59BCB1 in D:\WINNT
\system32\KERNEL32.dll (+0002BCB1).[gle=0x00000003]

D:\$WINDOWS.~BT\Sources\Panther>

On May 7, 11:44pm, Meinolf Weber <meiweb(nospam)@gmx.de> wrote:
> Hello BGU,
>
> Just to understand you correct, you try to make an inplace upgrade from 2000
> Pro to server 2008?
> You can not upgrade any workstation OS to a server, this will be always a
> fresh install. Additional it is not possible even from server 2000 to do
> an inplace upgrade to 2008. Inplace upgrade to 2008 is possible with 2003
> SP1 or higher.
>
> Best regards
>
> Meinolf Weber
> Disclaimer: This posting is provided "AS IS" with no warranties, and confers
> no rights.
> ** Please do NOT email, only reply to Newsgroups
> ** us YOU!!!http://www.blakjak.demon.co.uk/mul_crss.htm
>
>
>
> > Hello, When I try to runWindows Server 2008Setup from Windows
> > 2000 Professional, I receive the following error message during phase
> > 1 (before the first reboot):
>
> > "Windows installation encountered an unexpected error. Verify that
> > the installation sources are accessible, and restart the installation.
> > Error code:0xe0000100."
>
> > Steps to reproduce the problem:
> > 1. Find Win2000 Pro workstation (17GB disk, 15GB free, single
> > partition, Basic partition).
> > 2. Download & expandWindows Server 2008trial ISO image using
> > WinRAR.
> > 3. Run Setup.
> > 4. Setup makes it to the screen where I select the SKU I've
> > purchased.
> > 5. After clicking Next, I see the error.
> > Any ideas? The machine is somewhat old (443BX chipset), but other
> > than that, I can't think of a reason why Setup should fail.
>
> > Thanks,
> > BGU- Hide quoted text -
>
> - Show quoted text -

08/05/2008, 21h54	#3
BGU Messages: n/a Hébergeur:	Re: Error 0xe0000100 running Windows Server 2008 Setup from Windows2000 I'm trying to do a clean install (not an upgrade install). Launching Setup from the existing O/S is just a convenience, since I don't have the 2008 DVD here. I found some more information in a log file. Perhaps Setup is referencing an unknown symbol in KERNEL32.DLL. -BGU D:\$WINDOWS.~BT\Sources\Panther>type setuperr.log 2008-05-08 13:49:46, FatalError EulaText != 0 && EulaText[0] 2008-05-08 13:49:46, FatalError [0x090001] PANTHR Unhandled exception (code 0xE0000100: <unknown>) occurred at 0x7C59BCB1 in D:\WINNT \system32\KERNEL32.dll (+0002BCB1).[gle=0x00000003] D:\$WINDOWS.~BT\Sources\Panther> On May 7, 11:44pm, Meinolf Weber <meiweb(nospam)@gmx.de> wrote: > Hello BGU, > > Just to understand you correct, you try to make an inplace upgrade from 2000 > Pro to server 2008? > You can not upgrade any workstation OS to a server, this will be always a > fresh install. Additional it is not possible even from server 2000 to do > an inplace upgrade to 2008. Inplace upgrade to 2008 is possible with 2003 > SP1 or higher. > > Best regards > > Meinolf Weber > Disclaimer: This posting is provided "AS IS" with no warranties, and confers > no rights. > Please do NOT email, only reply to Newsgroups > us YOU!!!http://www.blakjak.demon.co.uk/mul_crss.htm > > > > > Hello, When I try to runWindows Server 2008Setup from Windows > > 2000 Professional, I receive the following error message during phase > > 1 (before the first reboot): > > > "Windows installation encountered an unexpected error. Verify that > > the installation sources are accessible, and restart the installation. > > Error code:0xe0000100." > > > Steps to reproduce the problem: > > 1. Find Win2000 Pro workstation (17GB disk, 15GB free, single > > partition, Basic partition). > > 2. Download & expandWindows Server 2008trial ISO image using > > WinRAR. > > 3. Run Setup. > > 4. Setup makes it to the screen where I select the SKU I've > > purchased. > > 5. After clicking Next, I see the error. > > Any ideas? The machine is somewhat old (443BX chipset), but other > > than that, I can't think of a reason why Setup should fail. > > > Thanks, > > BGU- Hide quoted text - > > - Show quoted text -