Hello ChanKaiShi,

Maybe this can you:
http://technet.microsoft.com/en-us/l.../bb977556.aspx

http://www.windowsservercatalog.com/

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.
** Please do NOT email, only reply to Newsgroups
** us YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

> My install ended up in BSOD screen. I reverted back to Win2003 SP2 and
> here is dump analysis below. Interesting that after revering back
> Windows 2008 installer informed that I need to run upgrade advisor to
> make sure everything is good. I don't think there is upgrade advisor
> available for Windows 2008.
>
> Anyway, what is my next step? I did not find any details about
> superbmc.sys driver. Computer I'm installing this on is dual CPU XEON
> 2.0 GHZ on SuperMicro motherboard and runs Windows 2003 SP2 just fine.
>
> What do I do?
>
> 0: kd> !analyze -v
> ************************************************** ********************
> *********
> *
> *
> * Bugcheck Analysis
> *
> *
> *
> ************************************************** ********************
> *********
> PAGE_FAULT_IN_NONPAGED_AREA (50)
> Invalid system memory was referenced. This cannot be protected by
> try-except,
> it must be protected by a Probe. Typically the address is just plain
> bad or
> it
> is pointing at freed memory.
> Arguments:
> Arg1: cc8133be, memory referenced.
> Arg2: 00000000, value 0 = read operation, 1 = write operation.
> Arg3: 818e2455, If non-zero, the instruction address which referenced
> the
> bad memory
> address.
> Arg4: 00000002, (reserved)
> Debugging Details:
> ------------------
> READ_ADDRESS: GetPointerFromAddress: unable to read from 819726d8
> Unable to read MiSystemVaType memory at 819532e0
> cc8133be
> FAULTING_IP:
> nt!RtlInitUnicodeStringEx+1f
> 818e2455 668b10 mov dx,word ptr [eax]
> MM_INTERNAL_CODE: 2
>
> CUSTOMER_CRASH_COUNT: 1
>
> DEFAULT_BUCKET_ID: DRIVER_FAULT_SERVER_MINIDUMP
>
> BUGCHECK_STR: 0x50
>
> PROCESS_NAME: System
>
> CURRENT_IRQL: 0
>
> TRAP_FRAME: 806998ec -- (.trap 0xffffffff806998ec)
> ErrCode = 00000000
> eax=cc8133be ebx=00000000 ecx=8069997c edx=00000096 esi=cc8133c0
> edi=83eaf446
> eip=818e2455 esp=80699960 ebp=80699964 iopl=0 nv up ei ng nz
> na pe nc
> cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000
> efl=00210286
> nt!RtlInitUnicodeStringEx+0x1f:
> 818e2455 668b10 mov dx,word ptr [eax]
> ds:0023:cc8133be=????
> Resetting default scope
> LAST_CONTROL_TRANSFER: from 818a0ae4 to 818b6b4e
>
> STACK_TEXT:
> 806998d4 818a0ae4 00000000 cc8133be 00000000 nt!MmAccessFault+0x158
> 806998d4 818e2455 00000000 cc8133be 00000000 nt!KiTrap0E+0xdc
> 80699964 818e300b 8069997c cc8133be 83eaf446
> nt!RtlInitUnicodeStringEx+0x1f
> 80699984 8c9d340d 806999c8 cc8133be 83eaf478
> nt!RtlAppendUnicodeToString+0x1b
> WARNING: Stack unwind information not available. Following frames may
> be
> wrong.
> 806999e4 8c9d570c 83eaf478 00000000 819a9aeb superbmc+0x40d
> 80699bd4 81b9323e 00000001 00000000 80699c20 superbmc+0x270c
> 80699c38 81b93935 8080d7b4 00000000 00000000
> nt!IopInitializeSystemDrivers+0x1af
> 80699c94 81b9744d 8080f590 8335fe10 8335fae8 nt!IoInitSystem+0x62c
> 80699d74 81998034 80699dc0 819ee6ad 8080f590
> nt!Phase1InitializationDiscard+0xb86
> 80699d7c 819ee6ad 8080f590 cd61f536 00000000
> nt!Phase1Initialization+0xd
> 80699dc0 818d5686 81998027 8080f590 00000000
> nt!PspSystemThreadStartup+0x9d
> 00000000 00000000 00000000 00000000 00000000 nt!KiThreadStartup+0x16
> STACK_COMMAND: kb
>
> FOLLOWUP_IP:
> superbmc+40d
> 8c9d340d ?? ???
> SYMBOL_STACK_INDEX: 4
>
> SYMBOL_NAME: superbmc+40d
>
> FOLLOWUP_NAME: MachineOwner
>
> MODULE_NAME: superbmc
>
> IMAGE_NAME: superbmc.SYS
>
> DEBUG_FLR_IMAGE_TIMESTAMP: 4328c0f7
>
> FAILURE_BUCKET_ID: 0x50_superbmc+40d
>
> BUCKET_ID: 0x50_superbmc+40d
>
> Followup: MachineOwner
> ---------