Discussion: Cannot browse domain
Afficher un message
Vieux 05/02/2008, 18h42   #4
Kevin D. Goodknecht Sr. [MVP]
Aucun Avatar
 
Messages: n/a
Hébergeur:
Par défaut Re: Cannot browse domain

Read inline please.

In news:138ED49A-46F8-4541-914B-7D701B9397F7@microsoft.com,
BillB <BillB@discussions.microsoft.com> typed:
> The root domain with 2 dc's (that everyone can browse) has the
> following ip config:
> Host name.................. npdc01
> Primary Dns Suffix....... novoprod.local
> Node Type.................. Unknown
> IP routing enabled....... No
> WINS Proxy enabled.... No
> DNS Suffix Search list.. novoprod.local
>
> Connection-specific DNS Suffix..
> DHCP enabled ........................ No
> IP Address.............................. 172.18.74.130
> Subnet Mask .......................... 255.255.255.0
> Default Gateway ..................... 172.18.74.254
> DNS Servers .......................... 172.18.74.130
> 172.18.74.131
> The second server is equal, but with IP 172.18.74.131
> ---------------------------
> In the production domain with 2 dc's, and no one can browse here,
> ip config
> Host Name............................. npdcdapi01
> Primary Dns Suffix.................. npdapi.novoprod.local
> Node type.............................. Hybrid
> IP routing enabled.................. No
> WINS Proxy enabled .............. No
> DNS Suffix Search List ........... npdapi.novoprod.local
>
> Ethernet adapter NLB connection:
> Connection specifik DNS suffix.. npdapi.novoprod.local
> DHCP enabled ......................... No
> IP Address .............................. 172.18.74.152
> Subnet mask ........................... 255.255.255.0
> Default Gateway ...................... 172.18.74.254
> DNS servers ............................ 172.18.74.140
> 172.18.74.141
>
> Ethernet adapter LAN:
> Connection specifik DNS suffix..
> DHCP enabled ......................... No
> IP Address .............................. 172.18.74.140
> Subnet mask ........................... 255.255.255.0
> Default Gateway ...................... 172.18.74.254
> DNS servers ............................ 172.18.74.140
> 172.18.74.141
> Primary WINS server ............... 172.18.74.140
>
> The second server is equal, with
> NLB ip 172.18.74.151
> LAN ip 172.18.74.141
>
> The DNS is AD integrated.
> WINS is only installed on 172.18.74.140 (dc1 in production: npdapi)
>
> There are some switches in the network, but the ie. DC1 and some other
> servers are on same switch, but still they can't browse NPDAPI
> (production) but they can browse root (novoprod).


I would have liked to have seen the actual ipconfig /all output
ipconfig /all >ipconfig.txt but from the looks of it, the problem is caused
by the two network adapters on the same server connected to the same network
on the same subnet facing each other with NetBIOS enabled on both. When you
do this, the two adapters broadcast the NetBIOS name to the same network and
both get ignored.

You need to disable one NIC, or use Teaming software for the NICs that will
make them act like one connection with one IP address.


--
Best regards,
Kevin D. Goodknecht Sr. [MVP]
Hope This s

===================================
When responding to posts, please "Reply to Group"
via your newsreader so that others may learn and
benefit from your issue, to respond directly to
me remove the nospam. from my email address.
===================================
http://www.lonestaramerica.com/
http://support.wftx.us/
http://message.wftx.us/
===================================
Use Outlook Express?... Get OE_Quotefix:
It will strip signature out and more
http://home.in.tum.de/~jain/software/oe-quotefix/
===================================
Keep a back up of your OE settings and folders
with OEBackup:
http://www.oe.com/OEBackup/Default.aspx
===================================


  Réponse avec citation
 
Page generated in 0,08421 seconds with 9 queries